How To Fill The Water Tank - Hitachi R-M600VAG9THX Instruction Manual

How to use Ice and Water Dispenser
Be careful, as the Ice Dispenser rotates and may cause injury to the fingers, etc.
Do not insert hands into the bottom of the Ice Bank in the Ice Dispenser.
Do not use the Ice Dispenser with the Ice Bank detached.
When someone else is using the refrigerator, refrain from opening the door or using the control panel.
Do not touch any of the mechanical parts of the Automatic Ice Maker. Since the Automatic Ice Maker rotates, there is a risk of injury to the fingers, etc.
Do not let small children operate the dispenser, as this may result in injury.
Do not hang on the Ice Bank.
Do not disassembly, repair, or modify your refrigerator by yourselves. Please consult with a retailer if any repair or is required.
Do not store food or other objects other than ice made by the Automatic Ice Maker in the Ice Bank (located in the Ice Dispenser).
Also, be sure not to place food or other articles into the ice tray, as doing so can cause a malfunction of the Ice Dispenser.
Do not touch the Ice Level Sensing Lever in the Automatic Ice Maker, as doing so may cause an accident to occur.
Do not insert fingers into the ice outlet or touch any parts nearby. Your fingers may be pinched or otherwise injured.
Do not use fragile glassware with the Automatic Ice Maker, as doing so could cause the glass to shatter, resulting in injury.

How to fill the Water Tank

Fill the Water Tank (located in the Refrigerator Compartment) as follows.
Note: Be sure to thoroughly wash the Water Tank before use for the first time.
Filling the Water Tank
Instructions for Normal Filling
1. Push the button on the water tank to open
the water tank lid and fill the tank with water.
Instructions for Removing the Water Tank and Filling
1. Remove the water tank.
● Hold the handle and pull the water tank towards yourself.
3. Carry the water tank by the handle with care.
● When carrying the water tank, place one hand
below the tank for horizontal stability.
18
WARNING
CAUTION
Close the lid to complete
the filling process.
2. Push the button on the water tank, open the lid and fill the
tank with water.
● Fill with water up to the "Full" line.
4. Insert the water tank until it passes the "Tank Position" line.
Process complete.
● If the water tank is not inserted all the way, water will not
be supplied to the Water Dispenser or Automatic Ice Maker.
This will prevent these features from functioning properly.
● Fill with water up to the "Full" line.
"Tank Position" line