Philips AVENT SCD501 User Manual page 11

Why is the connection lost or are there sound
interruptions every now and then?
• The baby unit and the parent unit are probably
close to the outer limits of the operating
range. Try a different location or decrease the
distance between the units. Please note that
it takes about 30 seconds each time before a
connection between the units is established.
• You may have placed the unit next to a
transmitter or other DECT appliance, such as
a DECT telephone or other 1.8GHz/1.9GHz
baby monitor. Move the unit away from the
other appliances until the connection is re-
established.
Is my baby monitor secure from eavesdropping
and interference?
• The DECT technology of this baby monitor
guarantees no interference from other
equipment and no eavesdropping.
Why do the batteries of the parent unit run low
so fast when I use the unit on batteries?
• The operating time on batteries may be up
to 24 hours, but this depends on the type of
batteries and how often and how long you use
the parent unit on batteries. Please note that
the batteries are not charged when the parent
unit is connected to an electrical outlet.
Plug in the parent unit when an electrical outlet
is available close by to save battery power.
• Make sure you use 1.5V R6 AA alkaline
non-rechargeable batteries or charged
1.2V R6 AA rechargeable batteries.
Recharge the rechargeable batteries in a
separate battery charger.
Can I use the baby unit on batteries?
• No, you cannot use the baby unit on batteries.
The baby unit can only be used on electrical
power.
General information
Supply unit:
Model: S003GU0600050 (US plug)
Input: 100-240V 50/60Hz ~0.15A
Output: 6.0V 0.5A, 3.0W
DoE level : Level VI
Parent unit Battery type:
2 x 1.5V, R6 AA type Alkaline non-
rechargeable batteries / 2 x 1.2V, R6 AA type
rechargeable batteries (not supplied)
11