Firstech RF-1WR3R-FM Quick Start Card

1W1B_QuickCard line.indd 1
QUICK START CARD
Tap this button for 1 second to lock your doors and/or arm your vehicle.
Tap this button twice within 1 second to unlock your doors and/or disarm
your vehicle.
Hold this button for 3 seconds to start your vehicle. Your vehicle's parking lights
will flash once and/or siren will chirp once for confirmation. Repeat and your
vehicle will shut off.
Valet Mode: If your remote start is not working, you may be in Valet Mode. Your parking
lights will also not flash. Your doors will still lock and unlock. To exit Valet Mode, turn the
vehicle's ignition On and then tap this button 5 times, waiting a second between each tap.
Your vehicle will flash the parking lights twice and exit Valet Mode. You can also exit Valet
Mode by turning the ignition On and then tapping the foot brake 10 times or reprogramming
your remote(s).
8102REUCL000100 // FT-1B Guide REV1
RF-1WR3R-FM
2013/6/6 9:28:50