JVC LT-32G4 Instructions Manual page 14

Other convenience functions
TIME
Sleep Timer
Auto Sleep
OSD Timer
OPTION
OSD Language
TT Language
Aspect Ratio
Blue Screen
Key Lock
First Time Installation
Reset
Software Update (USB)
SCREEN
Auto Adjust
Horizontal Pos.
Vertical Pos.
Clock
Phase
14
Selected Items
Off/10/20/30/40/50/60/90/120/240 min
Off/3/4/5 H
5/10/15/20/25/30 S
On / Off
On / Off
Setup hint
Sleep Timer switches the TV to standby after a defined
period of time.
To cancel the Sleep Timer, set to "Off".
When the Set and Remote key operation are not
operated with specified period by this setting(3/4/5 H),
the power status is changed to stand by mode
automatically.
OSD is cleared automatically as per this setting.
"CH LIST" OSD will disappear after 10 seconds in
•
spite of this setting.
See page 10.
See page 11.
See page 12.
On: You can set the TV to automatically change to a
blue screen and mute the sound if the signal is weak or
absent.
You can lock the panel buttons to prevent your settings
from being changed accidentally (by children, for example).
When the Key Lock is in On, all control buttons on the TV
panel do not operate.
See page 9.
Press or ENTER to enter the Reset to Default screen.
Press to select "Yes". Reset the TV function will now begin.
Upgrade the software with the USB drive.
"Horizontal Pos.", "Vertical Pos.", "Clock" and "Phase" are
adjusted automatically as per the input PC video signal.
• When PC-input mode was selected and a PC-
signal was input, Auto Adjust will be performed
automatically.
To adjust the horizontal placing of the image.
To adjust the vertical placing of the image.
Eliminates the vertical (Clock) interfering lines.
Eliminates the horizontal (Phase) interfering lines.