Download Print this page
1byone 203NA-0002 Quick Start Manual
1byone 203NA-0002 Quick Start Manual

1byone 203NA-0002 Quick Start Manual

High gain vhf/uhf combo tv antenna

Advertisement

Quick Links

Scan the TV for Channels
A. In the TV's setup menu, set the mode to Antenna or Air. Refer to the TV manual for detailed
instructions.
B. While in the TV's setup menu, set TV to scan for channels. This can sometimes be listed as
auto-program, channel search or channel scan. Consult your TV manual for detailed instructions.
Antenna Placement Options and Tips
TV reception and quality depends on the distance from the transmitting tower to your home.
Surrounding environments may also a ect signal strength and reception.
If your reception is sporadic or needs to be improved, try the helpful tips below:
1. Placing the antenna in a higher location may result in better reception.
2. Facing the antenna towards the broadcast tower may result in better reception.
Important: Always re-scan for channels whenever you move your antenna.
Frequently Asked Questions
How many channels can I receive?
The number of channels you can receive will be determined by what is being broadcast in your area.
Channel reception will vary from location to location based on terrain (including trees, buildings,
hills and mountains). The fewer obstructions, the better your chance of receiving strong digital
signals. Go to http://dtv.gov/maps. Enter your address for a listing of likely channels available in
your area.
Will all the channels I receive be High De nition (HD)?
Not all digital signals are High De nition (HD). Make sure you are using a High De nition Television
(HDTV) with built in ATSC tuner. When connecting the antenna to a third-party receiver, make sure it
is capable of receiving HD. Otherwise no HD channels can be picked up.
One channel is missing.
1. Something may be obstructing the signal. Move the antenna, then re-scan for channels.
2. Try turning the antenna 10 or 20 degrees in either direction to avoid re ection. Then re-scan for
channels.
The picture or sound freezes while I am watching a channel, or there are boxes in the
picture.
1. This is often caused by a weak or intermittent signal. Try moving the antenna to a di erent
location or aiming it in the direction of the broadcast tower for that channel.
For Optimal Performance
Place your 1byone® antenna in the location with the strongest reception. To check the exact
distance from your residence to the nearest tower, go to http://dtv.gov/maps and type in your
postal code. You will then have a better idea of what you should expect in the way of reception. If
there are multiple tower locations, optimize the position of your antenna by pointing it in the
direction of the weakest signal (usually the farthest away from you).
Distributed by
1byone® Products, Inc.
2313 E Philadelphia St, Ontario, CA 91761
www.1byone.com
High Gain VHF/UHF Combo TV Antenna
Model 203NA-0002
Congratulations! You have just purchased the finest, technologically advanced,
easy-to-install HD digital antenna for outdoor use. 1byone® products have been
rated "best sellers." We hope your investment in this quality antenna will give you
and your family years of enjoyment. Thank you for your purchase and your
support. We invite you to visit our website at www.1byone.com for other
high-quality products.
Package Content
Antenna main unit*1
Dipole box*1
Re ector unit*4
Wing nut*6
Mounting accessories*1
www.1byone.com
®

Advertisement

loading

Summary of Contents for 1byone 203NA-0002

  • Page 1 For Optimal Performance Place your 1byone® antenna in the location with the strongest reception. To check the exact distance from your residence to the nearest tower, go to http://dtv.gov/maps and type in your postal code.
  • Page 2 SPECIFICATION Frequency Range Channel Impedance No. of Elements 170-230MHz 5-12 21-69 470-862MHz Antenna Length Antenna Gain Front-Back Ratio Beam Width H/V 7-10dB 7-16dB H66°/ V38° 1100mm 10-14dB 16-30dB H43°/ V31° How To Install Step1. Push the two outside bars upward until they click (refer to Graph.A). Step2.