CS-VC70KE / CU-VC70KE / CS-VC90KE / CU-VC90KE / CS-VC120KE / CU-VC120KE
4. Take off the mounting tab at the left of the Heat Exchanger, pull
the Heat Exchanger forward (left side) and remove the Cross
Flow Fan. (Fig 11.)
12.4. OUTDOOR UNIT SERVICING
Outdoor Unit can be serviced by just removing the outdoor chassis
front cover as shown in the Fig 12.
12.5. REMOTE CONTROL RESET
When the batteries are inserted for the first time, or the batteries
are replaced, all the indications will blink and the remote control
might not work.
If this happens, remove the back cover of the remote control and
you will find a resetting terminal, and by shorting it with a minus
screwdriver, it will return to normal.
46
Fig. 11
Fig. 12