Table of Contents
Advertisement
> The audio system will search for cell
phones that are in range. This search
takes approximately 30 seconds. Any
phones detected will be displayed with
®
their Bluetooth
names. The hands-free
®
system's Bluetooth
name will appear
in the cell phone's display as
4. Select one of the cell phones shown in the
audio system's (center console) display.
5. Using the cell phone's keypad, enter the
digits shown in the audio system's display.
Alternative 2–using the cell phone's menus
1. Activate the hands-free system by briefly
pressing the PHONE button in the center
console. If there is a cell phone connected,
disconnect it from the hands-free system.
2. Perform a search using the cell phone's
®
Bluetooth
function (consult the cell
phone's owner's manual if necessary).
3. Select
My Car
in the list of devices shown
in the cell phone's display.
4. When prompted, enter the PIN code 1234
in the cell phone.
5. Connect to
My Car
from the cell phone.
The cell phone will be registered and will be
connected automatically to the audio system
Synchronizing
while the text
is displayed. For
more information on synchronizing a cell
phone, see page 259.
When a connection has been established, the
symbol and the cell phone's Bluetooth
name will be displayed. The cell phone can
now be controlled from the audio system.
My Car
.
Making a call
1. Ensure that
PHONE
the center console display and that the
symbol is visible (by pressing briefly on
PHONE on the center console).
2. Dial the desired phone number or use the
phone book (see page 259).
3. Press ENTER.
End the call by pressing EXIT.
Disconnecting the cell phone
The cell phone is automatically disconnected
from the audio system if it is moved out of
range. For more information about connec-
tions, see page 256.
The cell phone can be manually disconnected
from the hands-free system by pressing
PHONE. The hands-free system is also deac-
tivated when the ignition is switched off (or if
the driver's door is opened on vehicles equip-
ped with the optional keyless drive).
Bluetooth
When the cell phone is disconnected from the
hands-free system, a call in progress can be
continued using the cell phone's own speaker
and microphone.
®
Certain cell phones may require confirma-
tion from the phone's keypad when a call is
transferred from hands-free to the cell
is shown at the top of
phone.
Handling calls
Incoming calls
±
Press ENTER to answer a call, even if the
audio system is currently in e.g., CD or FM
mode.
±
Press EXIT to defer a call.
Automatic answer
This function means that incoming calls will be
answered automatically. Activate or deactivate
the function in the menu system under
Menu...
answer.
Call settings
While a call is in progress, press MENU or
ENTER on the center console to access the
following functions:
10 Audio
®
hands-free connection
NOTE
Call options...
Automatic
10
Phone
``
257
Advertisement
Table of Contents
