Volvo 2009 V50 Owner's Manual page 227

6. Insert a new bulb by turning it clockwise
(the profile on the bulb holder will corre-
spond with the profile in the base of the
bulb).
7. Reinsert the bulb holder. The mark TOP
should be upward.
Removing the taillight bulb holder
All bulbs in the taillight cluster can be replaced
from the cargo area. To access the bulb hold-
ers:
1. Switch off all lights and turn the key to
position 0.
1 The wiring to the LED brake lights is permanently connected to the bulb holder. It should not be removed.
2. Remove the covers (A or B) in the left/right
panels to access the bulb holders.
3. Disconnect the wiring connector from the
affected bulb holder.
4. Press the catches together and pull out the
bulb holder.
5. Replace the defective bulb.
6. Press the wiring connector back into posi-
tion.
7. Press the bulb holder into place and rein-
stall the cover.
09 Maintenance and servicing
Location of taillight bulbs
Location of taillight bulbs
Brake light (LED)
Taillight
Parking light
Turn signal
Replacing bulbs
09
1
227