Volvo 2009 C70 Owner's Manual page 219

High beam bulb
Halogen high beam bulb
1. Open the hood.
2. Remove the headlight housing (see
page 217).
NOTE
The halogen high beam bulb has a different
socket on vehicles equipped with Bi-
®
Xenon headlights. On these models, pull
the bulb straight out.
WARNING
®
Bi-Xenon headlights (option) – due to the
high voltage used by these headlights, the
®
Bi-Xenon bulbs should only be replaced by
a trained and qualified Volvo service tech-
nician.
3. Driver's side headlight: Turn the bulb
holder counterclockwise.
Passenger's side headlight: Turn the bulb
holder clockwise.
4. Pull out the bulb holder and replace the
bulb.
5. Reinstall the bulb holder. It can only be
installed in one position.
6. Reinstall the headlight housing (see
page 217).
09 Maintenance and servicing
Parking light bulb
1. Pull out the bulb holder with a pair of pliers.
The bulb holder should not be pulled out
by the wire.
2. Replace the bulb.
3. Press the bulb holder back into place. It
can only be installed in one position.
Replacing bulbs
09
}}
219