Sentry BT250 User Manual

Product Parameters
型号
Model
版本
Version
待机时间
Stand-by Time
电源输入
Power Input
降噪
Noise Reduction
切歌
Skip
功能
Function
产品应用
Product Application
配对与连接
Pairing and Connection
1 使手机与耳机的距离保持在一米以内，越近越好。
1. Keep the distance between the mobile phone and the headset within 1 m; the closer, the better.
2 按住" " 键约 5 秒看到红蓝灯交替闪烁时松开，此时耳机已进入配对模式。
2. Press and hold the key
lamps alternately blink. At this time, the headset has entered the paring mode.
3 开启手机蓝牙功能，搜索蓝牙设备，选择'BT250' 序号名即可配对连接，当连接成功后，
耳机蓝色指示灯慢闪
3. Enable the Bluetooth function of the mobile phone, search the Bluetooth equipment, select
'BT250' sequence name for paring and connection. After connection is successful, the blue
indicating lamp of the headset slowly blinks.
注意：
Notes:
若手机提示输入配对密码，请输入'0000'并确认
If the mobile phone prompts to enter the pairing password, please enter '0000' and confirm.
配对模素会维持 5 分钟，超过 2 分钟仍未成功配对连接时，耳机会自动切换到待机模式
The pairing mode will be maintained for 5 minutes. If pairing and connection are unsuccessful
beyond 2 minutes, the headset will automatically switch to the stand-by mode.
完成配对后，耳机和手机会相互记住对方，下次使用时无需再次配对。耳机再次开机
After pairing iscompleted, the headset and the handset will remember eachother, without pairing
User Manual
Bluetooth Headset
BT250
FCC ID:2ACP4BT250
使用距离
BT250
Use
Distance
电池容量
V4.1
Battery
Capacity
180 小时 通话时间
180 hours Talk Time
充电时间
DC5V/200mA
Charging
Time
协议
CVC6.0
Protocol
支持 语音提示
Support Voice
Prompt
来电报号，线控接听/挂断/拒接/开关机，电话重拨，音量调节，中
英文切换，智能一拖二，听音乐暂停/播放，上下切换歌曲
Caller report, line control answer/hang up/rejection/on-off, redial,
volume adjustment, Chinese-English shifting, intelligent one-driving-
two, music pause/play, up and down song switching
支持任何带蓝牙设备类型的手机，ipad 平板电脑，台式电脑。不自
带蓝牙功能的台式电脑可配合蓝牙适配器使用。
Support any mobile phones with Bluetooth device, iPad and desktop
computer. The desktop computer without Bluetooth function can be used
by matching with the Bluetooth adapter.
for about 5 seconds, and then release it when the red and the blue
10 米
10 m
55mAH
4.5 小时
4.5 hours
2 小时
2 hours
HFP HSP A2DP AVRCP APTX
支持
Support