Display and Icons Icon Description Signal and Roaming status icon Network mode icon Data flow icon Wi-Fi signal and number of access users Thenumber of unread message,maximum is Battery capacity icon, if battery capacity is lower than 25%, this icon is red. DataStatistics, used/total WPS status indicator Download and upload Data Speed...
Note: Do not remove SIM card when the device is powered on since this may damage the card and thedevice. Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity, water or dirt. Inserting and Charging the Battery 1.
You can also find the label for the default SSID and PASS WORD when you remove the back cover. You can also find the default SSID and Password in the WIFI Info page of Horizon MH50 screen once the device is powered on.
Note: The default user name is admin; the default password is admin. You can also find the label for default log in username and password printed on the device label by removing the back cover and battery. How to change the SSID &Password 1.
Page 9
Q: What to do if I forgot my Wi-Fi password? A: 1. you can find the Wi-Fi password in the Wi-Fi Info page on the LCD. 2.you can also reset the device to factory defaults by press the reset button for5 seconds. The default password is the last 8 digits of your device IMEI which is also listed on the SSID label under the back cover of the device.
Page 10
Do not use your device immediately after a sudden temperature change. In such case, it will produce moisture inside and outside your device. Wait until it becomes dry. • Handle your device carefully. Do not drop, bend, or strike it; your device may get damaged.
Page 11
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Device MH50 (FCC ID: 2ADX3MH50) has been tested against this SAR limit. SAR information on this can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search.