Table of Contents
Advertisement
T Focus Assist
"FOCUS" is displayed when auto focus is
0
activated.
When ACCU-Focus is enabled, "ACCU-
0
FOCUS" blinks for about 10 seconds while
Focus Assist starts up, after which the
"FOCUS" indicator lights up.
If recording starts while [ACCU-Focus] is
0
active, [ACCU-Focus] will be forcibly
deactivated.
Memo :
Displayed in the Display 0 screen only when
0
there is a change.
U Luminance Information
Displayed when the Spot Meter function is
activated.
MAX
: Maximum luminance
MIN
: Minimum luminance
V Date/Time Display
Displays the current date and time.
Memo :
The date/time display style can be specified in
0
[Main Menu] B [LCD/VF] B [Display Settings] B
[Date Style]/[Time Style].
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Date/Time] is
set to "Off".
When [Main Menu] B [System] B [Record Set]
0
B [Time Stamp] is set to "On", this item is not
displayed.
W Zoom Display
Displays the zoom position. (Zoom bar or
0
value)
The zoom bar will only be displayed for 3
0
seconds after the zoom operation is
activated.
The value will always be displayed. (0 to 99)
0
Memo :
You can specify the display method (Number/
0
Bar) in [LCD/VF] B [Display Settings] B "Zoom".
This item will not be displayed when "Off" is
selected.
Displayed in the Display 0 screen only when
0
there is a change.
X Network Connection Icon a
When [Main Menu] B [System] B [Network] is
set to "On(SDI Off)" or "On(HDMI Off)", the
network connection status is displayed.
This icon is not displayed when "Off" is selected.
Icon
Connection is not established
(starting up, preparing for
connection)
.
(Blink)
Connection is not established
(preparing for connection)
.
(Yellow)
Connection is established
.
When a USB adapter different
from the connection settings is
detected
.
(No display) When an incompatible USB
adapter is detected, or when
[Network] is set to "Off"
Memo :
When a cellular adapter that supports LTE
0
connection display is in use, "LTE" will appear to
the left of the above icon when LTE connection
is detected.
Y Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data recorded in
the SD card being played back.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
※
.
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
Example of user's bit display:
0
F F E E DD 2 0
.
Status
31
Advertisement
Table of Contents
