Pontiac 2002 Bonneville Owner's Manual page 54

CAUTION:
-
If a LATCH type child restraint isn't attached
to its anchorage points, the restraint won't be
able to protect a child sitting there. In a crash,
the child could be seriously injured or killed.
Make sure that a LATCH
is properly installed using the anchorage points,
or use the vehicle's safety belts to secure the
restraint. See "Securing a Child Restraint in a
Rear Seat Position" in the Index for information
on how to secure a child restraint in your vehicle
using the vehicle's safety belts.
1-48
-
type child restraint
Securing a Child Restraint Designed for the
LATCH System
1. Find the anchors for the seating position you want
to use, where the bottom of the seatback meets the
back of the seat cushion.
2. Put the child restraint on the seat.
3. Attach the anchor points on the child restraint to
the anchors in the vehicle. The child restraint
instructions will show you how.
4. If the child restraint is forward
top strap to the top strap anchor. See "Top Strap"
in the Index. Tighten the top strap according to the
child restraint instructions.
5. Push and pull the child restraint in different
directions to be sure it is secure.
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect
the anchor points.
-
facing, attach the