9.0 Troubleshooting
If the wheelchair is not working as it should, check the following points.
• Check whether the batteries are charged.
• Turn the wheelchair off and then back on again.
• Check whether the battery plugs are all securely in place.
• Check whether the freewheel switch is in the DRIVE position.
• Check the position of the speed regulator.
• Ensure that the controller isn't locked. ( Controller)
If the problem has not been resolved:
• Consult the troubleshooting section for the controller. ( Controller)
Q500M/Q400M General Manual
31
248035 Rev. G