FujiFilm FINEPIX XP130 Series Owner's Manual page 8

For Your Safety
IMPORTANT: Read the following notices before using the camera's
built-in wireless transmitter.
Q This product, which contains encryption function developed
in the United States, is controlled by the United States Export
Administration Regulations and may not be exported or re-
exported to any country to which the United States embargoes
goods.
• Use only a wireless network or Bluetooth device. FUJIFILM does not
accept liability for damages resulting from unauthorized use. Do not
use in applications requiring a high degree of reliability, for example
in medical devices or other systems that may directly or indirectly
impact human life. When using the device in computer and other
systems that demand a greater degree of reliability than offered by
wireless network or Bluetooth devices, be sure to take all necessary
precautions to ensure safety and prevent malfunction.
• Use only in the country in which the device was purchased. This device
conforms to regulations governing wireless network and Bluetooth
devices in the country in which it was purchased. Observe all
location regulations when using the device. FUJIFILM does not
accept liability for problems arising from use in other jurisdictions.
• Do not use the device in locations subject to magnetic fields, static
electricity, or radio interference. Do not use the transmitter in
the vicinity of microwave ovens or in other locations subject to
magnetic fields, static electricity, or radio interference that may
prevent reception of wireless signals. Mutual interference may occur
when the transmitter is used in the vicinity of other wireless devices
operating in the 2.4 GHz band.
• The wireless transmitter operates in the 2.4 GHz band using DSSS, OFDM
and GFSK modulation.
• Security: Wireless network and Bluetooth devices transmit data
via radio and consequently their use requires greater attention to
security than applies in the case of wired networks.
- Do not connect to unknown networks or networks to which
you do not have access rights, even if they are displayed on your
device, as such access may be considered unauthorized. Connect
only to networks to which you have access rights.
- Be aware that wireless transmissions may be vulnerable to
interception by third parties.
viii
Wireless Network and Bluetooth Devices: Cautions
• The following may be punishable by law:
- Disassembly or modification or this device
- Removal of device certification labels
• This device operates on the same frequency as commercial, educational,
and medical devices and wireless transmitters. It also operates on the
same frequency as licensed transmitters and special unlicensed low-
voltage transmitters used in RFID tracking systems for assembly lines
and in other similar applications.
• To prevent interference with the above devices, observe the following
precautions. Confirm that the RFID transmitter is not in operation
before using this device. Should you observe that the device
causes interference in licensed transmitters used for RFID tracking,
immediately stop using the affected frequency or move the
device to another location. If you notice that this device causes
interference in low-voltage RFID tracing systems, contact a FUJIFILM
representative.
• Do not use this device on board an aircraft. Note that Bluetooth may
remain on even when the camera is off . To disable Bluetooth,
go to the setup menu, select 0 CONNECTION SETTING >
Bluetooth SETTINGS > Bluetooth ON/OFF, and select OFF.