Silent Mode; Baby Monitor - Panasonic KX-TGE632 Operating Instructions Manual

Programming

Silent mode

Handset / Base unit
*1 KX-TGE640 series: page 3
Silent mode allows you to select a period of
time during which the handset and/or base
unit will not ring for outside calls. This feature
is useful for time periods when you do not
want to be disturbed, for example, while
sleeping. Silent mode can be set for each unit.
Using the phonebook's group feature
(page 28), you can also select groups of
callers whose calls override silent mode and
ring the unit (Caller ID subscribers only).
Important:
R Make sure the unit's date and time setting
is correct (page 14).
R We recommend turning the base unit ringer
off in addition to turning the silent mode on.
(KX-TGE630 series: page 3)
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1
For handset setting: MMENUN#238
For base unit setting (using a
*1
handset) : MMENUN#*238
2
MbN: Select the desired setting. a
MSAVEN
R If you select "Off", press MOFFN to
exit.
3
Enter the desired hour and minute you
wish to start this feature.
4
*: Select "AM" or "PM". a MOKN
5
Enter the desired hour and minute you
wish to end this feature.
6
*: Select "AM" or "PM".
7
MSAVEN a MOFFN
Changing the start and end time
1
For handset setting: MMENUN#237
For base unit setting (using a
*1
handset) : MMENUN#*237
For assistance, please visit http://shop.panasonic.com/support
38
*1
2
Continue from step 3, "Turning silent
mode on/off", page 38.
Selecting groups to bypass silent
mode
1
For handset setting: MMENUN#241
For base unit setting (using a
*1
handset) : MMENUN#*241
2
MbN: Select the desired groups. a
MSELECTN
R " " is displayed next to the selected
group numbers.
R To cancel the selected group:
MbN: Select the group. a Press
MSELECTN again. "
3
MSAVEN a MOFFN

Baby monitor

Handset / Base unit
*1 KX-TGE640 series: page 3
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or even while away from home. The
monitored handset (placed in a baby's room,
for example) will automatically call the
monitoring handset, base unit, or the phone
number stored when it detects sound.
Important:
R Before using this feature, we recommend
that you test this feature and adjust the
baby monitor sensitivity as needed,
especially if you plan to monitor from
outside.
R This feature should not be used as a
substitute for a medical or caregiver's
supervision. It is the caregiver's
responsibility to stay close enough to
handle any eventuality.
Note:
R If the unit is connected to a PBX system,
you cannot set the baby monitor.
R During the monitoring mode, battery
consumption is faster than usual. We
" disappears.
*1