Optical Image Stabilizer Lock
This function enhances optical image stabilization. You can further reduce the effects of the
shake that tends to occur when using zoom.
1
Touch
to turn the Image Stabilizer on. (
2
Select the menu.
: [RECORD SETUP] # [O.I.S. LOCK SETTING] # desired setting
MENU
[AUTO]:
Operates Activates Optical Image Stabilizer Lock automatically. The
icon is displayed in the position A of the LCD monitor.
[MANUAL]:
Operates Optical Image Stabilizer Lock while
≥ The default setting is [AUTO]. When [AUTO] is set,
3
(When [MANUAL] is selected)
Touch and hold
≥ Icon is displayed in A while you are touching and holding
≥ Optical Image Stabilizer Lock is released when you remove your finger from the icon.
∫ To make the display of
When [MANUAL] is set,
change the [O.I.S. LOCK DISPLAY] setting.
: [SETUP] # [O.I.S. LOCK DISPLAY] # desired setting
MENU
[ON]:
Constantly display.
[OFF]:
The icon will disappear after approx. 5 seconds without any touch operation.
≥ Stabilization may not be possible under strong shaking conditions.
≥ To record while moving the unit quickly, release Optical Image Stabilizer Lock.
.
disappear
stays displayed even if it is left unused. To hide the
- 62 -
60)
l
is touched and held.
is not displayed in the Touch Menu.
.
display,