Headphones Operation - Monster MTH9-1001-BLK Operation Manual

Headphones
Operation
Press+Hold the Multifunction Button
1
to turn on the Bluetooth headphones. (If the Transmitter is
ON, the Headphones will automatically reconnect, you will
hear a 2-note chime indicating success.)
2 Use the buttons to control your audio. You will have different
controls based on what device you are connected to:
To power down the headphones, hold the Multifunction
3
Button
red 3 times and then remain off. You will hear a 4-note chime
indicating that they have successfully powered off.
To Use as Wired Auxiliary Headphones:
Plug a 3.5mm audio cable into the Aux jack (additional cable
not included). The headphones will automatically switch from
"Bluetooth" mode to "Auxiliary" mode and power off to conserve
battery. The Headphones do not need to be ON in Aux mode.
Note: Volume and music control buttons on the
headphones will not function while in Aux mode.
Press+Hold
Press+Hold
Press+Hold
Press+Hold
Press
answer/end phone calls
Press
Press
for 5 seconds, the LED light indicator will flash
Button to raise the volume
Button to lower the volume
Button to raise the volume
Button to lower the volume
Button to play/pause audio and to
Button to change to the next track
Button to change to the previous track
for 3 seconds