Hardware Overview
LEDs
#
Colour
Status
1
Red
Solid
Blinking
Green
Solid
Blinking
Connections
#
Description
2
Power Receptor Connect the supplied power adapter.
3
LAN (PoE) Port
Connect to a Power over Ethernet (PoE) switch or router via an Ethernet cable.
4
Reset Button
Press and hold for five seconds to reset the access point to the factory default settings. Press
and hold for one second to reboot the access point.
Description
Indicates the access point has malfunctioned
This LED will blink during boot-up
Indicates that the DAP-2660 is working properly
This light will blink green during data transmission