Mazda 2005 Miata MX-5 Owner's Manual page 107

MX-5 Miata_8T72-EA-04G_Edition1 Page107
Wednesday, June 9 2004 3:4 PM
qActivation/Deactivation
To activate the system, press the CRUISE
MAIN switch.
To deactivate the system, press the switch
again.
Indicator light
WARNING
Cruise Main Switch:
Leaving the CRUISE MAIN switch on
when not using the cruise control is
dangerous as it may be switched on
accidentally. This could result in loss
of vehicle control. Keep the CRUISE
MAIN switch off when cruise control
is not in use.
qTo Set Speed
1. Activate the cruise control system.
2. Accelerate to the desired speed, which
must be more than 40 km/h (25 mph).
Form No.8T72-EA-04G
Black plate (107,1)
Starting and Driving
3. Turn the control knob to SET/COAST
and release it at the speed you want.
Release the accelerator at the same
time.
Control knob
Don't continue to hold the knob. Until you
release it, speed will continue to drop
(unless you continue to accelerate) and
you'll miss the desired speed.
NOTE
The SET function can't be activated
l
until about 2 seconds after the
CRUISE MAIN switch has been
engaged.
On a steep grade, the vehicle may
l
momentarily slow down going up or
speed up while going down.
Driving Your Mazda
5-15