Singer 4411 Instruction Manual
  1. Manuals
  2. Brands
  3. Singer Manuals
  4. Sewing Machine
  5. 4411
  6. Instruction manual

Singer 4411 Instruction Manual

Hide thumbs Also See for 4411:
Table of Contents

Advertisement

Quick Links

Instruction Manual
4411
Manual de Instrucciones
Manuel d'Instruction

Advertisement

Table of Contents
loading

Related Manuals for Singer 4411

Summary of Contents for Singer 4411

  • Page 1 Instruction Manual 4411 Manual de Instrucciones Manuel d'Instruction...
  • Page 2 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety should always be needle causing it to break. followed, including the following: 9. Switch the sewing machine off ("O") when making any adjustments Read all instructions before using this sewing machine. in the needle area, such as threading needle, changing needle, threading bobbin, or changing presser foot, and the like.
  • Page 3 Congratulations Felicitaciones Félicitations As the owner of a new Singer sewing Como propietario/ a de una nueva Vous voici à présent propriétaire d'une machine, you are about to begin an máquina de coser Singer, usted acaba machine à coudre Singer et en cette exciting adventure in creativity.

  • Page 4: Table Of Contents

    List of contents Machine Basics Principle Parts of the Machine..............................2/4 Connecting Machine to Power Source ............................6 Two Step Presser Foot Lifter/ Adjusting Presser Foot Pressure .....................8 Accessories ...................................10 Threading the Machine Winding the Bobbin ................................12 Inserting the Bobbin ................................14 Threading the Upper Thread ..............................16 Raising the Bobbin Thread ..............................18 Thread Tension..................................20 Sewing...
  • Page 5 Principal Parts of the Machine 1. Thread tension dial 2. Presser foot pressure adjustment 3. Thread take-up lever 4. Reverse sewing lever 5. Thread cutter 6. Presser foot 7. Needle plate cover 8. Removable extension table/ accessory storage 9. Three needle position dial 10.
  • Page 6 Principal Parts of the Machine 14. Horizontal spool pin 15. Bobbin winding spindle Hole for a uxiliary spool pin 17. Handwheel 18. Buttonhole stitch balance adjustment slot 19. Power and light switch 20. Main plug socket 21. Bobbin thread guide 22.

  • Page 7: Connecting Machine To Power Source

    Connecting Machine to Power Source Connect the machine to a power source as illustrated. (1) This appliance is equipped with a polarized plug which must be used with the appropriate polarized outlet. (2) Attention: Unplug power cord when machine is not in use. Foot control The foot control pedal regulates the sewing speed.

  • Page 8: Two Step Presser Foot Lifter/Adjusting Presser Foot Pressure

    Two Step Presser Foot Lifter When sewing several layers or thick fabrics, the presser foot can be raised to a higher position for easy positioning of the work. (A) Adjusting Presser Foot Pressure The presser foot pressure of the machine has been pre-set and requires no particular readjustment according to the type of fabric (light-or-heavy weight).

  • Page 9: Accessories

    Accessories Standard accessories (1) 1 Standard accessories a. All purpose foot b. Zipper foot c. Buttonhole foot d. Button sewing foot 006806008 006905008 006909008 006914008 e. Seam ripper/ brush f. Edge/ quilting guide g. Pack of needles h. Spool holders i.
  • Page 10 Winding the Bobbin Place thread and corresponding spool holder on to spool . (1/2) - Snap thread into thread guide. (3) - Wind thread clockwise around bobbin winder tension discs. (4) - Thread bobbin as illustrated and place on spindle. (5) - Push bobbin spindle to right.

  • Page 11: Inserting The Bobbin

    Inserting the Bobbin When inserting or removing the bobbin, the needle must be fully raised. 1. Insert the bobbin in the bobbin case with the thread running counterclockwise direction (arrow). 2. Pull the thread through the slit (A). 3. Draw the thread clockwise until it slips into the notch (B). 4.

  • Page 12: Threading The Upper Thread

    Threading the Upper Thread This is a simple operation but it is important to carry out correctly as by not doing so several sewing problems could result - Start by raising the needle to its highest point (1), and continue turning the handwheel counterclockwise until the needle just slightly begins to descend.

  • Page 13: Raising The Bobbin Thread

    Raising the Bobbin Thread Hold the upper thread with the left hand. Turn the handwheel (1) towards you (counterclockwise) lowering, then raising needle. Note: If it is difficult to raise the bobbin thread, check to make sure the thread is not trapped by the hinged cover or the Removable Extension Table.

  • Page 14: Thread Tension

    Thread Tension Upper thread tension Basic thread tension setting: "4". (1) To increase the tension, turn the dial to the next number up. To reduce the tension, turn the dial to the next number down. A. Normal thread tension for straight stitch sewing. B.

  • Page 15: How To Choose Your Pattern

    How to Choose Your Pattern The diagram on this page display the stitch patterns available on the machine. Turn the Pattern Selector Dial (e) to select the desired pattern. Use the Stitch Length Dial (d) to adjust the stitch length as desired for the project. Use the Stitch Width Dial (c) to adjust the width of the stitch as desired.
  • Page 16 Three Needle Position Dial The needle position can be altered with the "Three needle position dial". For normal work, the needle position is middle. For edge stitching or sewing parallel lines of top stitch, select needle position left or right. For twin needle stitching, needle position is middle.

  • Page 17: Stitch Width Dial & Stitch Length Dial

    Stitch Width Dial & Stitch Length Dial Function of stitch width dial The maximum zigzag stitch width for zigzag stitching is 5mm; however, the width can be reduced on any patterns. The width increases as you move zigzag dial from "0" - "6". (1) The Stitch Width Dial is also the control for the straight stitch infinite needle position.

  • Page 18: Sewing Straight Stitch

    Sewing Straight Stitch To begin sewing, set the machine for straight stitch. (1) Place the fabric under the presser foot with the fabric edge lined up with the desired seam guide line on the needle plate. Lower the presser foot lifter, and then step on the foot controller to start sewing.

  • Page 19: Reverse Sewing/Removing The Work/ Cutting The Thread

    Reverse Sewing To secure the beginning and the end of a seam, press down the reverse sewing lever (A). Sew a few reverse stitches. Release the lever and the machine will sew forward again. (1) Removing the Work Turn the handwheel toward you (counterclockwise) to bring the thread take up lever to its highest position, raise the presser foot and remove work behind the needle and presser...

  • Page 20: Blind Hem

    (2) Unfold the fabric when hemming is completed and press. Note: To make blind hem sewing even easier, use a blind hem foot, available from your SINGER retailer. (See page 10 for part number)

  • Page 21: Buttonholes

    Buttonholes Prepare 1. Take off the all purpose foot and attach the buttonhole foot. 2. Measure diameter and thickness of button and add 0.3 cm (1/8") for bar tacks to obtain correct buttonhole length; mark buttonhole length on fabric (a). 3.

  • Page 22: Left And Right Side Balance For Buttonhole

    Left and Right Side Balance for Buttonhole Stitch density on right and left sides of buttonhole can be adjusted by buttonhole balance control dial. This dial should usually be in a neutral position (between "+" and " ") – If the stitches on the left side of buttonhole are too close together, turn the dial to the left (+).

  • Page 23: Sewing On Buttons

    Sewing on Buttons Move the drop feed control to right side to lower the feed dogs. (1) Change the all purpose foot to the button sewing foot. (2) Set the stitch length to "0". Place the button and fabric under the Button Sewing foot, as illustrated in (3).

  • Page 24: Installing The Removable Extension Table

    Installing the Removable Extension Table Hold the removable extension table horizontally, and push it in the direction of the arrow. (1) To remove the extension table, pull it toward the left. The inside of the removable extension table can be utilized as an accessory box.

  • Page 25: Attaching The Presser Foot Shank

    Attaching the Presser Foot Shank Raise the presser bar (a) with the presser foot lifter. Attach the presser foot shank (b) as illustrated. (1) Attaching the presser foot Lower the presser foot shank (b) using the presser foot lifter, until the cut-out (c) is directly above the pin (d). (2) The presser foot (f) will engage automatically.
  • Page 26 Leather, vinyl, upholstery. (Leaves smaller hole than standard SINGER 2032 large needle.) Note : ® 1. For best sewing results always use genuine SINGER needles. 2. Replace needle often (approximately every other garment ) and/ or at first thread breakage or skipped stitches.

  • Page 27: How To Drop Feed Dog

    How To Drop Feed Dog For ordinary sewing, keep the feed dog up, for freehand embroidery, sewing on buttons and darning, drop the feed dog. To raise (a) and lower (b) feed dog. (2)
  • Page 28 Change the needle regularly, especially if it is showing signs of wear and causing problems. For best sewing results ® always use SINGER Brand Needles. Insert the needle as illustrated as follows: A. Loosen the needle clamp screw and tighten again after inserting the new needle.

  • Page 29: Changing The Bulb

    - Loosen screw (A) as illustrated. (1) - Remove the face plate (B). - Unscrew the bulb and install a new one (C). (2) - Replace the face plate and tighten screw. ® Should there be any problem, consult your SINGER retailer.

  • Page 30: Troubleshooting Guide

    Troubleshooting Guide Problem Cause Correction Upper thread 1. The machine is not threaded correctly. 1. Rethread the machine. breaks 2. The thread tension is too tight. 2. Reduce the thread tension. (lower number) 3. The thread is too thick for the needle. 3.
  • Page 31 021Q2D0101(A)( ) Jun/10 SINGER 4411(Q25DST)

Table of Contents