Basics
Module
removal
Input cable
installation
It is possible to remove an input module from a module slot without using
any tools, just use your fingers to press the fastener downwards and then
pull the module outwards to remove it from the module slot.
1) Press the fastener downwards
2) Pull the module out-
wards to remove it
from the module slot
When all the required input modules hHDMIe been installed you can connect
the input signal cables one by one to the input modules.
It is also possible to make a loop through from one input module to another.
*
DVB-T2 and
DVB-C has no
loop-through
6
*
)