Changing A Flat Tire - Honda 2008 Fit Owner's Manual

Main Menu Table Of Contents
If you have a flat tire while driving,
stop in a safe place to change it.
Drive slowly along the shoulder until
you get to an exit or an area to stop
that is far away from the traffic lanes.
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
1. Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park (automatic)
or reverse (manual). Apply the
parking brake.
2. Turn on the hazard warning lights,
and turn the ignition switch to the
LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.
2008 Fit

Changing a Flat Tire

LOOP
SPARE
TIRE
TOOL KIT JACK
3. Open the tailgate. Raise the cargo
area floor lid by lifting it up with
the strap that has a loop. To keep
the floor lid open, hook the loop of
the strap to a leg of the rear center
head restraint.
4. Take the tool kit out of the spare
tire.
STRAP
CONTINUED
219