Headlamp High/Low-Beam Changer - GMC 2002 Envoy Owner's Manual

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check the fuse (see "Fuses and Circuit
Breakers" in the Index) and for burned
If you have a trailer towing option with added wiring for
the trailer lamps, a different turn signal flasher is used.
With this flasher installed, the signal indicator will flash
even if a turn signal bulb is burned out. Check the front
and rear turn signal lamps regularly to make sure they
are working.
Turn Signal On Chime
If your turn signal is left on for more than 3/4 of a mile
(1.2 km), a chime will sound at each flash of the turn
signal. To turn off the chime, move the turn signal lever
to the off position.

Headlamp High/Low-Beam Changer

To change the headlamps from low to high beam, push
the lever toward the instrument panel. To return to
-
out bulbs.
low
toward you. Then release it.
-
beam headlamps, pull the multifunction lever
When the high beams are
on, this indicator light on
the instrument panel cluster
will also be on.
2-39