Disassociating The Memory Feature From The Remote Transmitter; Keyless Entry System (If Equipped) - Ford 2004 Freestar Manual

Disassociating the memory feature from the remote transmitter

To deactivate this feature:
1. Press the SET control on the driver's door panel.
2. Within 5 five seconds, press any control on the remote transmitter
which you would like to deactivate and then press the SET control on
the driver's door panel again.
3. Repeat this procedure for another remote transmitter if desired.

KEYLESS ENTRY SYSTEM (IF EQUIPPED)

You can use the keyless entry
keypad to:
• lock or unlock the doors without using a key.
• activate or deactivate the autolock feature.
• open and close the right and left power sliding doors (if equipped).
• recall memory seat/side view mirrors/adjustable pedals position Driver
1 or Driver 2 (if equipped).
The keypad can be operated with the factory set 5–digit entry code; this
code is located:
• on the owner's wallet card in the glove box,
• marked on the passenger compartment fuse panel (located below and
to the left of the steering, near the brake pedal),
• and is available from your
authorized dealer.
You can also create your own 5–digit
personal entry code.
When pressing the controls on the
keypad, press the middle of the
controls to ensure a good activation.
2004 Freestar (win)
Owners Guide (post-2002-fmt)
USA English (fus)
Locks and Security
101