Setting Up The Monitor; Attaching The Stand - Dell P2421DCc User Manual

Setting up the monitor

Attaching the stand

NOTE: The stand is detached when the monitor is shipped from the
factory.
NOTE: This is applicable for a monitor with a stand.If you have
purchased a third-party stand refer to the respective stand setup
guide for the set up instructions.
To attach the monitor stand.
1. Follow the instructions on the flaps of carton to remove the stand from the
top cushion that secures it.
2. Insert the stand base blocks fully into the stand slot.
3. Lift the screw handle and turn the screw clockwise.
4. After fully tightening the screw, fold the screw handle flat within the recess.
5. Lift the cover to expose the VESA area for stand assembly.
6. Attach the stand assembly to the monitor.
a. Fit the two tabs on the upper part of the stand to the groove on the back
of the monitor.
b. Press the stand down till it snaps into place.
│
26 Setting up the monitor