18. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
18.1 CS-Z25TKEA CS-Z35TKEA
18.1.1
Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal
Procedures
18.1.1.1
To Remove Front Grille
18.1.1.2
Caps Removal
WARNING
Figure 1
a.
Use a manual screw driver with at least 150 mm shaft
length. Do not use a hand drill type.
b.
Slightly tilt the screw driver handle downward so that the
shaft does not touch the flap. Be careful not to scratch the
flap while undoing the screws.
118
CAUTION