Flash Led; Bluetooth - Sony Xperia ZL Test Instructions

Tests: Service Tests

2.2.13 Flash LED

Check the Flash LED at the back side of phone whether it's
turned on.
Press Back key to return to Service Test Menu.
2.2.14
During this test, the distance between the phone and
the target Bluetooth device must be 1.5 to 5 meters!
Make sure the target Bluetooth device is enabled and
visible always!
The Bluetooth test will be done in following sequences:
Step 1: Enable Bluetooth; wait 4-5 seconds, shows OK;
There is a permission request, select 'Yes'.
Step 2: Search;
Step 3: Show the Device Found list;
Step 4: Select the Target Bluetooth Device, and Type PIN
code to pair.
Step 5: Type the Pairing PIN code on Target Bluetooth
Device also, when succeeded, it shows "Test
Complete".
Press Back key to return to Service Test Menu.
1271-7725 Rev 2

Sony Mobile Communications AB – Company Internal

Bluetooth

Test Instructions (mech)
Only symbolic view
Distance :
1.5 to 5 meters
Sony
SONY
Ericsson
Bluetooth
Enable Bluetooth OK
Searching
Devices found
Test Complete
XPERIA
Only symbolic view
Sony
SONY
Ericsson
Bluetooth
Enable Bluetooth OK
Searching
Devices found
Test Complete
XPERIA
12(31)