Chevrolet 2011 Suburban 2500 Owner's Manual page 266

3. Say each digit, one at a time,
that you want to store. After
each digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered, say
Store, and then follow the
directions given by the system to
save a name tag for this number.
1. Press and hold
/
two seconds.
2. Say Delete.
3. Say the name tag you want to
delete.
This command deletes all stored
name tags in the Hands Free
Calling Directory and the OnStar
Turn by Turn Destinations Directory,
if equipped.
To delete all name tags:
1. Press and hold
two seconds.
2. Say Delete all name tags.
The list command will list all stored
numbers and name tags.
for
1. Press and hold
two seconds.
2. Say Directory.
3. Say Hands Free Calling.
4. Say List.
Calls can be made using the
following commands.
command can be used
interchangeably to dial a phone
number or a stored name tag.
/ for
/ for
The dial or call
This command allows a
phone number to be dialed by
entering the digits one at a time.
This command is used to
dial the last number used on the cell
phone.
1. Press and hold /
two seconds.
2. Say Dial or Call.
3. Say the entire number without
pausing, or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
for