Sony VGC-RB30 VAIO User Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Desktop
  5. VAIO VGC-RB30 Series
  6. User manual
Sony VGC-RB30 VAIO User Manual

Sony VGC-RB30 VAIO User Manual

Vaio desktops: vaio desktop computer
Hide thumbs Also See for VGC-RB30 VAIO:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Manual
Welcome
Thank you for purchasing a Sony VAIO
functionality. The information provided here is designed to help you to become familiar with the hardware and software
programs included with your computer.
View the
Electronic
Flyer, which provides updates and supplemental information about your computer.
Go to the
Sony online support Web
hardware specifications and preinstalled software information.
For information about the Sony software preinstalled on your computer, click Start in the Windows
then click Welcome to VAIO life.
computer! Your new computer is a superb blend of high technology and easy-to-use
®
site, to view the VAIO
®
Computer Specifications, which lists your computer's
taskbar, and
®
Page 1

Advertisement

Table of Contents
loading

Related Manuals for Sony VGC-RB30 VAIO

Summary of Contents for Sony VGC-RB30 VAIO

  • Page 1  For information about the Sony software preinstalled on your computer, click Start in the Windows then click Welcome to VAIO life. computer! Your new computer is a superb blend of high technology and easy-to-use ®...

  • Page 2: Getting Started

    Getting Started Congratulations on your purchase of the Sony VAIO state-of-the-art computer functionality with the latest audio, video and information technology features.  Unpacking Your Computer  Planning an Ergonomic Work Space computer! Your new, high-performance, multimedia computer combines ®...

  • Page 3: Unpacking Your Computer

    Unpacking Your Computer Your computer may not be supplied with all of the accessories shown, depending on the computer configuration purchased. For details on the accessories supplied with your computer, see the online Your VAIO computer is not supplied with System or Application Recovery CDs. Use the VAIO Recovery Wizard utility to ®...
  • Page 4  Create music CDs with: SonicStage software — Burn music CDs from MP3, WMA, WAV, and OpenMG files; create ATRAC CDs for your Sony ATRAC CD Walkman; or make backup copies of your CDs. SonicStage Mastering Studio software — Burn music CDs of your collection of vinyl records or cassette tapes.

  • Page 5: Planning An Ergonomic Work Space

    Planning an Ergonomic Work Space Before you set up your new computer, find the best location for your new computer and plan your work space. There are several ergonomic factors to consider when you arrange your work space:  Stable work surface — Use a stable work surface large enough to support the computer and other peripheral equipment.

  • Page 6: Locating Controls And Ports

    Locating Controls And Ports This section is intended to familiarize you with the controls, ports and jacks on your computer and supplied accessories. Your computer may not be equipped with all of these hardware features or accessories. The location of the controls, ports, and jacks may vary from the illustrations shown in this section.

  • Page 7: About The Front Panel

    About the Front Panel The front panel of your VAIO Computer enables access to drives, memory card readers, ports and jacks that enable you to ® connect compatible peripheral devices. Front panel Your computer may not be equipped with all of these hardware features or accessories. The location of the controls, ports, and jacks may vary from the illustrations shown in this section.
  • Page 8 /M ic rodrive s lots . ® i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK , Memory Stick Pro , and Memory Stick Duo ® (MMC) memory card reader (MMC).
  • Page 9 connection may vary, depending on the software programs, operating system, and compatible i.LINK devices. All products with an i.LINK connection may not communicate with each other. Refer to the documentation that came with your compatible i.LINK device for information on operating conditions and proper connection.

  • Page 10: About The Back Panel

    About the Back Panel The back panel of your computer contains the ports for supplied and optional accessories. The icons on the back panel locate and identify the ports on your computer. Back panel The available ports and jacks on your computer may vary from those shown in this illustration, based on the computer model purchased.
  • Page 11 Connection for an S-video cable (optional). Modem line jack Connection for an RJ-11 telephone cable (optional). i.LINK 6-pin S400 port (IEEE 1394) Connection and power for a compatible digital device, such as a Sony Digital Handycam Ethernet port camcorder. ®...
  • Page 12 Connection for a 10BASE-T/100BASE-TX Ethernet. (The port marked with (Network) is for LAN connections only.) Monitor port Connection for a VGA monitor. TV Out (S-video) jack Connection for an S-video cable. DVI-D monitor port Connection for a DVI monitor. VHF/UHF port Connection for a TV coaxial cable (supplied).

  • Page 13: About The Keyboard

    About the Keyboard Your VAIO keyboard uses a standard key arrangement with additional keys that perform specific functions. ® VAIO Keyboard DESCRIPTION Function The 12 function keys along the top of the keyboard are used to perform certain tasks. The task associated with each function key may vary from one application to the next.
  • Page 14 Page 14...

  • Page 15: About The Remote Control

    About the Remote Control The Media Center remote control is supplied with certain VAIO Windows XP Media Center Edition ® specifications sheet. Remote control The Media Center remote control can start and stop video recording and playback, select channels, and set viewing preferences.
  • Page 16 PAUSE button Press to pause media playback. Press again to resume playback. FWD button Press to fast-forward media at three speeds. SKIP button Press to move media forward, for example, one audio track, one DVD chapter, and 30 seconds of recorded TV or video. REPLAY button Press to move media backward, for example, one audio track, one DVD chapter, and seven seconds of TV or video.
  • Page 17 (Press Enter or OK to activate the channel selection.) CLEAR button Use to backspace and delete entered text. STANDBY button Press to place the computer in Stand by mode to reduce power consumption. MY PICTURES button Press to view pictures or a slide show. MY VIDEOS button Press to view videos from your video collection.
  • Page 18 LIVE TV button Press to view TV programming. ENTER button Press to activate feature or action, such as channel selection or return to previous channel. (This button's actions are similar to using the OK button.) Setting up the remote control Turn the remote control over.

  • Page 19: About The I.link Port

    About the i.LINK Port Your VAIO computer is equipped with a 4-pin and a 6-pin i.LINK ® connected i.LINK device. A 6-pin i.LINK port can supply power (10V to 12V) to a connected i.LINK device, if the device is equipped with a 6-pin connector. The total power supplied by the 6-pin i.LINK port does not exceed 6 watts.

  • Page 20: Setting Up Your Computer

    Setting Up Your Computer Your computer may not be equipped with all of the hardware features described in the section. See the online sheet for your computer's hardware configuration.  Connecting a Display (Monitor)  Connecting the Speakers  Connecting the Keyboard and Mouse ...

  • Page 21: Connecting A Display (Monitor)

    Connecting a Display (Monitor) The location, availability, and type of the monitor port may vary, depending on the model purchased.See the specifications sheet for your computer on the Sony Online Support Web site at http://www.sony.com/pcsupport, for details about your computer's hardware configuration Plug the display's cable into the appropriate monitor port.

  • Page 22: Connecting The Speakers

    Y our s upplied s peakers may vary in appearanc e from the illus tration s hown here. See your c omputer's online s pec ific ations s heet for more information about s upplied ac c es s ories . . For information about supplied accessories, go to the Sony to view your computer's specifications sheet.

  • Page 23: Connecting The Keyboard And Mouse

    Connecting the Keyboard and Mouse Plug the keyboard cable into the keyboard port on the back of the computer. Plug the mouse cable into the mouse port on the back of the computer. To connect the keyboard and m ouse Page 23...

  • Page 24: Connecting The Telephone And Modem

    Connecting the Telephone and Modem Your computer is equipped with a single modem line jack to connect your installed modem with your telephone wall jack. To use your wall jack for both telephone and modem lines, purchase an additional RJ-11 telephone cable and a "1-to-2" jack adapter device (splitter).

  • Page 25: Connecting The Power Cords

    Connecting the Power Cords Plug the power cord into the back of the computer. Plug both the display and computer power cords into a grounded AC wall outlet or a power strip. To connect the power cords Page 25...

  • Page 26: Turning On Your Computer

    Turning On Your Computer When you start your computer for the first time, your computer may detect new equipment and display a dialog box that prompts you to restart your computer. Respond to this prompt immediately. If your computer has Microsoft required to use these features before you turn on the computer.

  • Page 27: Setting Up Media Center

    Setting Up Media Center Certain VAIO computer models have the Microsoft enhancing your music, TV, and video enjoyment. Media Center provides many options for TV, DVD, and music viewing, personal video recording, and music playback. This section describes how to set up your TV, set-top box, and other equipment.

  • Page 28: Setting Up Tv Connections

    Setting Up TV Connections The best method of connecting your computer, TV monitor or display, and TV programming access, is determined by the type of cable service connection available in your home. Your computer's hardware configuration may vary from the illustrations shown in this section.
  • Page 29 Connecting to standard cable access (CATV) Option 1 Connect one end of the TV coaxial cable (supplied) to your cable service access. Connect the other end of the TV coaxial cable to the VHF/UHF port on the back panel of your computer. To connect in CATV m ode (Option 1) Option 2 Connect one end of a TV coaxial cable (optional) to your cable service access.
  • Page 30 Connecting to a standard antenna (air) system You can connect your computer to an indoor/outdoor antenna system, using Option 1 or 2 from the previous section, Connecting to standard cable access (CATV) combiner/transformer (optional) to connect your computer and the indoor/outdoor antenna system. If you are connecting to an indoor/outdoor antenna system, you may need to reorient the antenna for better reception.
  • Page 31 Connecting a Cable or Satellite Set-top Box You can connect your computer to cable or satellite service that requires a set-top box. Option 1 Connect one end of a TV coaxial cable (optional) to your cable service access. Connect the other end to the In jack on the back panel of your set-top box.
  • Page 32 You can connect your computer to a set-top box using an S-video cable (optional) and an audio cable (optional) instead of a stereo A/V dubbing cable (optional). See Connecting Other Devices. Page 32...

  • Page 33: Connecting The Remote Sensor And Remote Sensor Controls

    Connecting the Remote Sensor and Remote Sensor Controls The remote sensor communicates with the Media Center remote control, enabling you to change channels and to perform other functions. If you are using a cable or satellite set-top box, you can attach the remote sensor control which enables you to control the set-top box using the Media Center remote control.
  • Page 34 To connect the remote sensor Connect the remote sensor unit to a USB port located on either the front or back panel of your computer. Position the remote sensor to enable unobstructed communication with your remote control. Connecting the rem ote sensor (back panel) Page 34...
  • Page 35 To connect the remote sensor control Plug the remote sensor control's cable into either jack (1 or 2) located on the back of the remote sensor. When you attach the remote control sensor to a cable or satellite set-top box, you can control the set-top box functions with your remote control.

  • Page 36: Connecting Other Devices

    Connecting Other Devices This section illustrates how to connect other devices to your VAIO connection capability. You can locate the appropriate connections on the back panel or behind the lower bottom panel on the front of the computer. You can connect a VCR or camcorder, using the composite audio In jacks. Your VCR or camcorder may have either standard video or S-video connection capability.
  • Page 37 Connecting a TV monitor (display) Connect the video connector end of the video cable adapter panel of your computer. Connect the jack end of the video cable adapter to either end of a video cable (optional). Connect the other end of the video cable to the Video-In jack on your TV monitor or display, located on either the side or back of your TV monitor/display.

  • Page 38: Turning Off Your Computer

    Turning Off Your Computer Follow these steps when you are ready to turn off your computer for an extended period of time. To avoid loss of data, do not use the Power button to turn off the computer. Page 38...
  • Page 39 To turn off your computer Click Start in the Windows ® The Turn Off Computer dialog box appears. Select the Turn Off option. Respond to any prompts about saving your documents. Wait for your computer to turn off automatically—the power indicator light turns off. Turn off any peripheral devices connected to your computer.
  • Page 40 About the power button If your computer stops responding, press and hold the Power button for more than six seconds to force your system to shut down. You may need to repeat this procedure if your computer does not shut down on the first attempt. Page 40...

  • Page 41: Registering Your Computer

    Registering Your Computer Register your computer and take advantage of Sony's commitment to quality customer support Sony produc t regis tration is voluntary; failure to regis ter will not diminis h your limited warranty rights . Page 41...
  • Page 42 About the benefits of registering with Sony  Sony Customer Support — Communicate with a Support Representative to troubleshoot problems you may be having with your computer.  Limited warranty — Protect your investment. See the Limited Warranty Card for more details.
  • Page 43 Using Memory Cards and Memory Card Readers This section provides basic information about using your computer's installed memory card readers. Your computer may not be equipped with all of the memory card readers described in this section, depending on the computer model or configuration purchased.
  • Page 44 About Your Memory Card Readers Your VAIO computer is equipped with memory card readers that are compatible with many popular types of memory cards. ® You can use your computer's memory card readers to transfer data between digital cameras, camcorders, music players, and other audio/video devices.

  • Page 45: Inserting A Memory Card

    Inserting a Memory Card Your memory card reader(s) may be located behind a protective cover on the front of the computer. The style and location of front panel cover varies, depending on the computer model purchased. Certain VAIO memory card reader(s) or the readers may be located on the side panel. See your computer's specification sheet for details about your computer's memory card reader configuration.

  • Page 46: Removing A Memory Card

    Removing a Memory Card The correct way to remove a memory card from a memory card reader varies, depending upon the media, reader, or computer model. Use care when removing a memory card to avoid damage to the reader or card. Do not remove a memory card while the media access indicator light is on.

  • Page 47: About Memory Stick Media

    — Provides the same features and benefits of MagicGate form that is 1/3 smaller in size. Compatibility between software programs and Memory Stick media formats may vary. At this time, Sony suggests using only MagicGate Memory Stick media to store and transfer any data created with SonicStage...
  • Page 48 Sharing Memory Cards If you plan to share your memory card between your VAIO the card must be formatted properly.  Format the memory card by using it in the device first. See the information supplied with the device for details how to format the memory card.
  • Page 49 Upgrading and Maintaining your VAIO Computer In the future you may want to increase the functionality of your VAIO basic upgrades and maintenance on your system.  Overview  About Opening the Computer  About Add-on Card Installation  About Installing Memory ...
  • Page 50 Overview The upgrading procedures described in this section assume that you are familiar with the general terminology associated with personal computers, safety practices, required regulatory compliances, and the modification of electronic equipment. Before upgrading your computer Disconnect the computer from its power source and from telecommunications links, networks, or modems before you open the unit or follow any procedures described in this section.
  • Page 51 About Opening the Computer Removing the side cover Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and disconnect any peripheral devices. Position the system unit with the back panel facing towards you. Unscrew the side cover release screws located on the edge of the back panel and set them aside.
  • Page 52 Tilt the side cover away from the computer and set aside. If you remove the cover immediately after you shut down your computer, the components may be too hot to touch. Wait until the internal parts of the system unit cool down before you attempt to remove the cover. Replacing the cover Hold the side cover against the side of the computer, with the side cover extending about 2 inches past the back of the computer.
  • Page 53 9.05 inches. Add-on card configuration varies by model. Some models, such as Configure-to-Order (CTO) systems, may contain preinstalled add-on cards. Observe the proper safety precautions when you add cards to your Sony computer. See computer. Installing an add-on card Shut down your computer and turn off all peripheral devices, such as your printer.
  • Page 54 Attach any internal cables that the card requires. See the instructions supplied with the add-on card. Replace the side cover. See Replacing the cover. Reconnect the power cord and all peripheral devices. Turn on the computer. Page 54...

  • Page 55: About Installing Memory

    For memory replacement or upgrades, use the correct memory module for your computer's configuration. See the specifications sheet for your computer on the Sony online support Web site at http://www.sony.com/pcsupport, for details about the amount and type of memory installed in your computer.
  • Page 56 Installing a memory module Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and any peripheral devices. Remove the side cover. See Gently place the unit on its side. If necessary, remove any cables, add-on cards, or other components to access the memory module slots.

  • Page 57: About The Lithium Battery

    Dispose of the lithium battery properly. In some areas, the disposal of lithium batteries in household or business trash may be prohibited. You can return your unwanted lithium batteries to your nearest Sony Service Center or Factory Service Center. To locate a Service Center near you, visit the Sony online support Web site at http://www.sony.com/pcsupport.

  • Page 58: About Hard Disk Drive Installation

    Click Start from the Windows From the VAIO Help and Support Center, click VAIO Recovery Options. Your computer must have an active Internet connection to access the Sony online support Web site. Observe the proper safety precautions when you upgrade your Sony computer. See computer.
  • Page 59 Remove the side cover and place the unit on its side. See Configure the jumpers on your new drive as a slave, using the configuration instructions supplied with the drive. Detach the power and drive cables from the original hard disk drive in your computer. Release the drive holder from the chassis by removing the drive holder screw(s).
  • Page 60 13. Connect the second drive connector to the new drive. Orient the connector to align pin 1 on the red side of the ribbon cable with pin 1 on the new drive. 14. Connect the second power connector to the new drive, following the instructions supplied with the drive. Replacing the driv e holder 15.

  • Page 61: Troubleshooting

    Troubleshooting This section describes how to solve common problems and provides helpful information about using your computer's hardware features and preinstalled software. Your computer may not be equipped with all of the features or software discussed in this section, depending on the computer model or configuration purchased. ...

  • Page 62: About Vaio Computer Functions

    About VAIO Computer Functions My computer does not start.  Verify that the computer is plugged into a power source and that it is turned on. Check that the power indicator is lit on the front panel of the computer. ...
  • Page 63 About VAIO Computer Functions My computer does not start.  Verify that the computer is plugged into a power source and that it is turned on. Check that the power indicator is lit on the front panel of the computer. ...
  • Page 64 What can I do if my computer or software stop responding? You can try to locate and close the software program that has stopped responding. Press the Ctrl+Alt+Delete keys. The Windows Task Manager window appears. From the Applications tab, locate the software program that has the status message, "Not responding." Select the software program that has a Not Responding status and click End Task.
  • Page 65 Why does the Windows operating system stop responding during shutdown? The Windows operating system may not shut down properly for many reasons, including incompatible or conflicting drivers, damaged files, or non-responsive hardware. For troubleshooting information, you can search Windows Help. Click Start in the Windows taskbar and select Help and Support.
  • Page 66 Why is my computer running slowly?  The computer's responsiveness varies depending with the number of software programs that are open and running. Close any programs that you are not currently using.  Increasing the computer memory may also help. For information on installing memory, please see the online VAIO User Guide.
  • Page 67 How do I change the video resolution of my display? Click Start in the Windows taskbar, and then select Control Panel. Select Appearance and Themes, and then select Change the screen resolution. Click the Settings tab. Change the Screen resolution and Color quality to the desired levels. Click Apply and then click OK.
  • Page 68 Why doesn't my computer resume normal operation from Stand by mode?  If your keyboard has a Stand by key  If your keyboard is not equipped with a Stand by key, press any key to resume normal operation.  For troubleshooting information, you can search Windows Help.
  • Page 69 About System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to your computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against ®...
  • Page 70 About System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to your computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against ®...
  • Page 71 How do I keep my preinstalled antivirus software updated? You can keep the preinstalled Norton Internet Security Corporation. To download and install the latest security update Double-click the Norton Internet Security icon If you have not previously registered the antivirus software, a series of information wizards appear. Follow the on-screen instructions to complete each wizard Double-click the Norton Internet Security icon again.

  • Page 72: About Media Center

    About Media Center The Microsoft Windows XP Media Center Edition operating system is not installed on all VAIO Digital Studio computers. ® ® ® See your online specifications sheet for more information about your computer's configuration. Why doesn't the REW button on the remote control work when I use My Music? The REW button does not "rewind"...
  • Page 73 About Media Center The Microsoft Windows XP Media Center Edition operating system is not installed on all VAIO Digital Studio computers. ® ® ® See your online specifications sheet for more information about your computer's configuration. Why doesn't the REW button on the remote control work when I use My Music? The REW button does not "rewind"...
  • Page 74 Why aren't my song information edits visible in My Music? If you record a song in OpenMG ATRAC format and make edits, such as title, artist, or genre, using SonicStage software, the changes become visible when the music file is played in My Music. If you make changes to a music file using Media Center, the changes are not visible when played in SonicStage software.
  • Page 75 Why do my song information edits revert to the original content when I use My Music? When you record songs with SonicStage software, and then use Windows Media Player software to edit the song's ® information, you may not see your changes when you play the song in My Music. Windows Media Player supports playback of songs recorded in OpenMG (ATRAC3 or ATRAC3+ ) format, but does not support any edits made to the OpenMG format music files.
  • Page 76 Why do my optimized music files take so long to appear in My Music? When you use SonicStage software to optimize music files to ATRAC3 or ATRAC3+ format, it may take a few moments for the music files to be available in My Music. To access these files sooner, start Windows Media Player software first, and then play the song with My Music.
  • Page 77 Why do I get the error message, "The input media is invalid" when I try to play an MP3 file in My Music? If you have added cover art to the MP3 file using SonicStage software, your file may contain an unsynchronized ID3v2 header.
  • Page 78 Why won't My Music show the albums (playlists) I recorded with SonicStage software? Playlists (albums) recorded with SonicStage software may not be immediately available in the Media Center Album window. To access these files sooner, start Windows Media Player software first, and then play the song with My Music. ®...
  • Page 79 Why did my Click to DVD software recording session capture television instead of video? If Media Center starts a scheduled TV recording while you are capturing analog video with Click to DVD programming may be captured instead of the video and the timed recording may fail. Media Center and the analog capture feature of Click to DVD software both require the use a TV tuner/MPEG encoder card and cannot access the card at the same time.
  • Page 80 Why can't I view or record a movie when my computer is connected to an external device, such as a VCR or DVD player, or when I am using an analog input connection? If you see a blue background in the View window, the movie may be copyright-protected. Your computer is not able to display or record a video or DVD that is copyright-protected by Macrovision or CGMS-A (Copy Generation Management System - Analog).
  • Page 81 Why can't I fast forward or rewind a video? The rewind and fast forward features are not supported by all video formats. Try using the Skip or Replay buttons, which provides a similar function. Page 81...
  • Page 82 How do I use the Media Center software or remote control to adjust my monitor when viewing TV programs? Media Center software and remote control do not have video adjustment capability. Use the controls on the monitor to adjust video settings, such as contrast, hue, and brightness. See the information provided with your monitor for instructions on adjusting its video controls.
  • Page 83 What can I do if my computer freezes and restarts while I'm watching a DVD or live TV? Verify that the monitor refresh rate is set to 60 Hz, using the following steps: Right-click on the desktop, and click Properties from the shortcut menu. The Display Properties window appears.

  • Page 84: About The Mouse And Keyboard

    About the Mouse and Keyboard Why doesn't my mouse work properly?  Confirm that the mouse is plugged securely into the mouse port. If you are using a USB mouse, verify that the mouse is plugged securely into the appropriate USB port. ...
  • Page 85 About the Mouse and Keyboard Why doesn't my mouse work properly?  Confirm that the mouse is plugged securely into the mouse port. If you are using a USB mouse, verify that the mouse is plugged securely into the appropriate USB port. ...
  • Page 86 How do I set up my mouse for left-hand use? Click Start in the Windows taskbar, then click Control Panel. Click Printers and Other Hardware, then click Mouse. The Mouse Properties dialog box appears. From the Buttons tab, select Switch primary and secondary buttons under the Button Configuration options. Click Apply, then click OK.
  • Page 87 Why doesn't my keyboard work properly?  Check that the keyboard is securely plugged into the keyboard port.  Save and close all open software programs. Turn off your computer, wait approximately 10 seconds, and then restart your computer.  If you are using a wireless keyboard: ...

  • Page 88: About The Modem

    About the Modem Why is my modem connection slow? Many factors can influence modem connection speed, such as:  Telephone line noise.  Incompatibility with other telephone equipment such as fax machines or other modems.  Internet Service Providers (ISP) connection capability may vary. If you think your modem is not connecting properly to other PC-based modems, fax machines, or your ISP, check the following: ...
  • Page 89 About the Modem Why is my modem connection slow? Many factors can influence modem connection speed, such as:  Telephone line noise.  Incompatibility with other telephone equipment such as fax machines or other modems.  Internet Service Providers (ISP) connection capability may vary. If you think your modem is not connecting properly to other PC-based modems, fax machines, or your ISP, check the following: ...
  • Page 90 Check that the access telephone number (POP) is correct.  All software programs that are preinstalled by Sony are compatible with your computer's modem. If you have installed other software, contact the software publisher for information on how to configure the software in order to recognize the modem.
  • Page 91 How do I change my modem to rotary or touch-tone dialing? Click Start in the Windows taskbar, then click Control Panel. Click Printers and Other Hardware, then click Phone and Modem options. From the Dialing Rules tab, click Edit. The Edit Location dialog box appears. Select the Tone or Pulse option.
  • Page 92 How do I set up a dial-up connection? After you have connected your computer's modem to a telephone wall jack, follow these steps to set up your dial-up connection to the Internet: Click Start from the Windows taskbar and select All Programs. Point to Accessories, point to Communications, and then click New Connection Wizard.

  • Page 93: About The Speakers

    About the Speakers Why is there no sound in any software program?  Check that the speakers are plugged into the Headphones jack.  If your speakers have a mute button, verify that it is turned off.  If your speakers are powered by batteries, verify that the batteries are inserted properly and that they are charged.
  • Page 94 About the Speakers Why is there no sound in any software program?  Check that the speakers are plugged into the Headphones jack.  If your speakers have a mute button, verify that it is turned off.  If your speakers are powered by batteries, verify that the batteries are inserted properly and that they are charged.
  • Page 95 Why is the S/PDIF option disabled in the Microsoft S/PDIF is enabled in Media Center setting is not selected in the InterVideo To change audio settings in the WinDVD software program Click Start in the Windows ® Point to InterVideo WindDVD 5, and the click on InterVideo WinDVD 5 for VAIO. The InterVideo WinDVD for VAIO window opens.
  • Page 96 Why can't I hear dialogue during DVD movie playback, using my 5.1 channel  Verify that your speaker system is connected correctly.  Change the computer's audio settings to 6-channel, to match your 5.1 speaker system.  Change the audio settings in the RealTek ...
  • Page 97 About Using a Microphone Why doesn't my microphone work properly? Check that the microphone is plugged into the Microphone jack. Page 97...
  • Page 98 About Using a Microphone Why doesn't my microphone work properly? Check that the microphone is plugged into the Microphone jack. Page 98...
  • Page 99 Why is my microphone so sensitive to background noise? If you find there is too much background noise when you record sound, you should adjust the microphone by following these steps: Click Start in the Windows taskbar, then click Control Panel. Click Sounds, Speech, and Audio Devices, then click Sounds and Audio Devices.

  • Page 100: About Using Peripheral Equipment

    About Using Peripheral Equipment How do I install a printer?  Connect your USB or IEEE 1394 printer to the appropriate port on your computer's front, back or side panels your printer has a USB, IEEE 1394, or infrared connection, contact the printer manufacturer for information or updates that may be required for proper installation.
  • Page 101 About Using Peripheral Equipment How do I install a printer?  Connect your USB or IEEE 1394 printer to the appropriate port on your computer's front, back or side panels your printer has a USB, IEEE 1394, or infrared connection, contact the printer manufacturer for information or updates that may be required for proper installation.
  • Page 102 The connected printer does not function properly when the computer resumes from a power saving mode.  Clear the printer memory by turning the printer off for approximately 10 seconds, and then turning it back on.  If your printer does not resume normal operations, try restarting your computer. Page 102...

  • Page 103: Notes On Use

    Notes On Use The information in this section provides basic procedures for handling your computer and common peripheral devices, and using storage media.  About the Power Source  About Handling the Computer  About Using a Monitor (Display)  About Disposing of the Lithium Battery ...

  • Page 104: About The Power Source

    About the Power Source Before opening your computer, turn the computer off and let it cool down for 10 minutes. This protects you against internal components that may be too hot to handle.  Your computer operates on 100-220 V AC 50/60 Hz only. ...
  • Page 105 Your computer, keyboard, and mouse consist of high-precision electronic parts. Do not drop them or bump them against other objects.  Your Sony computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a private branch exchange (PBX). ...
  • Page 106  Use the CONNECT buttons on the wireless device and your computer, if available, to establish communication between the equipment.  Avoid using radio-controlled toys or equipment, CB radios, and other wireless devices in the area near your wireless keyboard. These other devices may cause interference, causing your wireless keyboard or mouse to stop working properly.
  • Page 107 About Using a Monitor (Display)  DVD playback and certain video-related software may not function correctly when your monitor is set to a high refresh rate. If your monitor does not play back video content properly, try setting the display to a lower refresh rate.

  • Page 108: About Disposing Of The Lithium Battery

    Do not handle damaged or leaking lithium batteries. The lithium battery may explode if mistreated. Do not disassemble it or dispose of it in fire. Replace the battery with a Sony CR2032 lithium battery. Using a type of battery other than a CR2032 may present a risk of fire or explosion.
  • Page 109 Memory Stick and Memory Stick PRO Currently, Sony SonicStage ® Sony suggests using only the MagicGate Memory Stick media to store and transfer any data created with SonicStage and OpenMG software.  VAIO computers may not support all of the high-speed data transfer or access control features of the new Memory ®...

  • Page 110: Support Options

    Support Options Sony provides several options to help solve common problems or to locate support for your VAIO describes all available resources and offers suggestions on how to access this information for maximum results.  Immediate Help and Support ...

  • Page 111: Immediate Help And Support

    T his booklet is s upplied with c ertain V A I O your c omputer's hardware c onfiguration. Y ou c an loc ate the online H elp for Sony ® — The Quick Start contains information on how to set up your computer quickly and taskbar, then click Help and Support.

  • Page 112: Software Help And Support

    Software Help and Support Technical support information for the preinstalled software on your computer is located in this section. Sony software support is free of charge for 90 days after the original date of purchase. Your computer may not be supplied with all of the software discussed in this section, depending on the computer purchased.
  • Page 113 Sony Electronics Inc. PictureGear Studio is picture management software that can display photos from your hard drive or a Sony digital still camera. The photos appear in a convenient light-table format so that you can easily view the contents of an entire folder, create your own photo albums, and make prints.
  • Page 114 888-4-SONY-PC (888-476-6972) hours 7 days a week, 24 hours a day VAIO Edit Components Sony Electronics Inc. VAIO Edit Components is a software plug-in for Adobe quality when capturing video with your Sony digital camcorder. Web site http://www.sony.com/pcsupport telephone 888-4-SONY-PC (888-476-6972)
  • Page 115 7 days a week, 24 hours a day WinDVD for VAIO ® ® InterVideo, Inc. Web site http://www.intervideo.com/jsp/Support.jsp telephone 510-651-0888 WordPerfect ® Corel Corporation Web site http://www.corel.com computer by regularly checking the Sony Online Support Web site for ® computers (media ® Page 115...

  • Page 116: Resources For Additional Help And Support

    Sony online support Web site Online help and support are available 24 hours a day, seven days a week, when you visit the Sony online support Web site. You can access the Web site at http://www.sony.com/pcsupport.

This manual is also suitable for:

Vaio vgc-rb31pVaio vgc-rb32Vaio vgc-rb34gVaio vgc-rb35gVaio vgc-rb36gVaio vgc-rb38g ... Show all

Table of Contents