Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21c
46092
Advertisement
Related Manuals for Harbor Freight Tools CHICAGO ELECTRIC 46092
Summary of Contents for Harbor Freight Tools CHICAGO ELECTRIC 46092
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
- Page 2 Table of Contents Safety ............3 Maintenance ..........9 Specifications ..........5 Parts List and Diagram ......10 Operation ............ 6 Warranty ............ 12 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
- Page 3 Only use accessories intended for use with this helmet. Approved accessories 2. Keep work area clean. Cluttered are available from Harbor Freight Tools. areas invite injuries. 11. Do not weld if under the influence of alcohol 3. Observe work area conditions. Do not use or drugs.
- Page 4 Do not use any solvents information. If unreadable or missing, contact on filter’s screen or helmet components. Harbor Freight Tools for a replacement. Protect filter from liquid and dirt contact. Do not immerse the filter in water. b. Should the Auto-Darkening Welding Helmet...
- Page 5 Specifications Description Auto-Darkening Welding Helmet Power Source Solar powered cells with battery assistance (not rechargeable) Operating Temp. 23° to 131° F Resting Shade Shade # 4 Shade Range 9 to 13 UV/IR Protection Up to DIN 16 at all times Lens Type ANSI Z87.1-2003 approved Viewing Area...
- Page 6 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Function The Auto-Darkening Welding Helmet is designed to protect the eyes and face from sparks, splatter, and harmful radiation under normal welding conditions.
- Page 7 Adjusting Headband Solar Cells Adjust the Headband so that the helmet This Welding Helmet utilizes high performance solar is seated securely on your head as low cells as power supply, and has two built-in 3V lithium as possible and close to your face. batteries as power backup.
- Page 8 Common Problems and Remedies 1. Irregular Darkening Or Dimming 3. Slow Response a. Headband has been set unevenly on a. Operating temperature is too low (do not both sides of helmet (unequal distances use at temperatures below 23° F). from the eyes to filter’s lens). 4.
- Page 9 Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Lens and Helmet Maintenance Replace the Front Lens Cover if it is damaged 2.
- Page 10 Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
- Page 11 Assembly Diagram Item 46092 For technical questions, please call 1-888-866-5797. Page 11...
- Page 12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.