Setting Preset Stations - Chevrolet 2005 Equinox Owner's Manual

Hide thumbs Also See for 2005 Equinox:
Table of Contents

Advertisement

The radio will only seek and scan stations with a strong
signal that are in the selected band.
1–6 (Preset Pushbuttons): Press this button to
play stations that are programmed on the radio
preset pushbuttons.
The radio will only seek preset stations with a strong
signal that are in the selected band.

Setting Preset Stations

Up to 30 stations (six FM1, six FM2, and six AM,
six XM1 and six XM2 (if equipped)), can be programmed
on the six numbered pushbuttons, by performing the
following steps:
1. Turn the radio on.
2. Press BAND to select FM1, FM2, AM, or XM1
or XM2.
3. Tune in the desired station.
4. Press AUTO EQ to select the equalization.
5. Press and hold one of the six numbered
pushbuttons until you hear a beep. Whenever that
numbered pushbutton is pressed, the station
that was set will return and the equalization that
was selected will be stored for that pushbutton.
6. Repeat the steps for each pushbutton.
Setting the Tone
(Bass/Midrange/Treble)
P
Q
/
(Bass/Treble): Press this button until BASS,
MID, or TREBLE appears on the display. Turn the ADJ
knob to increase or to decrease. The display will
show the bass, mid, or treble level. If a station is weak
or noisy, decrease the treble.
To adjust bass, midrange, or treble to the middle
position, select BASS, MID, or TREBLE. Then press
and hold this button for more than two seconds. You will
hear one beep and the tone control will be adjusted to
the middle position.
To adjust all tone controls to the middle position, push
and hold the tone button when no tone control is
displayed. ALL CENTERED will appear on the display
and you will hear one beep. The bass, midrange,
and treble will be adjusted to the middle position.
AUTO EQ (Automatic Equalization): Press this button
to select customized equalization settings designed
for country, jazz, talk, pop, rock, and classical.
To return to the manual mode, press and release the
AUTO EQ button until TONE Custom appears on
the display. You can also manually adjust the bass,
midrange, and treble using the tone button.
3-39

Advertisement

Table of Contents
loading

Table of Contents