Bush Hog TOUGH 2010 Series Specifications

Bush Hog
®
2010 Series Rotary Cutters
BUSH HOG TOUGH FeaTUReS
®
TOUGH 5 Year Gearbox Limited Warranty
TOUGH 7 Gauge Sidebands
TOUGH Replaceable Wide Skids
TOUGH Cushioned axle arms
TOUGH Powder Coat Paint
MOdeL
Cutting Width
Cutting Capacity
dimensions (width x length)
Type Hitch
Cutting Height
deck Thickness
Side Bands
Minimum Tractor HP
driveline
Cross Shaft
Gearbox HP
Tractor PTO Speed
driveline Protection
Height adjustment
Blade Holder(s)
Blades
Blade Tip Speed
Tires Laminated Tire on Lift and Semi-Mount Models, Laminted Tire or 15 inch Automotive Wheel on Pull Models, Used Aircraft Tires on Pull Type Only
axles
deflectors
Safety Tow Chain
approximate Weight
Options
Warranty
FeaTUReS
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
TOUGH
10 ft 3 inches x 9 ft 4 inches (Lift), 10 ft 3 inches x 13 ft (Pull)
3 Point Cat. II & III Standard & Quick Hitch, Center Pull Self Leveling or Semi-Mount Cat. II & III
Choice of Manual Height Bundle or Hydraulic Cylinder
15,778 FPM/540 RPM; 15,708 FPM/1000 RPM
Adjustable Axle Arms for Row Spacing, Choice of Single or Dual Axles on Pull Models
Standard Front Belting and Rear Bands (Chains Optional)
1922 lbs (Lift), 2177 lbs (Pull), 1929 lbs (Semi-Mount)
Single Row Chain Deflectors for Front and Rear
1 year limited warranty with a 5 year gearbox limited warranty
•Rear Sloped Deck • High blade tip speeds • Deep sidebands • Quick detach gearbox shields
2010
9 ft 9 inches
2 inches
2 to 12 inches
11 gauge
7 gauge x 10 inches
40 PTO (Pull), 60 PTO (Lift)
ASAE Category 4
Rubber Element
120 Main and 90 Outboard
540/1000 RPM
4 Plate PTO Slip Clutch
Round Pans
x 4 inches - Corner Uplift
1/2
Standard for Pull Models
Page 20