Keypad; Display Screen - RIDGID SeekTech ST-510 Operator's Manual

SeekTech ST-510 Line Transmitter

Keypad

Output Current Adjustment and

Display Screen

• Battery Level - Shows remaining battery power in 5 steps.
• Manufacturer – Shows the manufacturer's frequency set being used (default is
SeekTech).
• Voltage – Voltage that is applied to the leads. This may say MAX, indicating the
voltage is at its highest allowable point (~80 V peak-to-peak, ~30V RMS (square
wave.))
• Current Strength – This is the current flowing through the circuit in milliamps (mA).
• Sound – Indicates if sound is ON or OFF.
•
Ohms (resistance) – This shows the approximate resistance in the circuit. See page
16.
•
Watts (Power) – Total power that the transmitter is putting out. In Battery Saver mode,
this is absent.
•
Frequency – Frequency being used.
Display Screen
Use Up/Down Arrows for
Menu Control Keys
Select
(Hold down, use up/down for
contrast adjustment)
Frequency Selection
Frequencies
128Hz
1kHz
8kHz
33kHz/
262kHz
Figure 2: Keypad
Voltage
Battery Level
Manufacturer
Frequency
Figure 3: Display Screen
)
)
)
Inductive Mode
On/Off
Orientation For
Inductive Mode
Main Menu
)
Sound On/Off
)
)
Power On/Off
High Voltage Indicator
Watts
Omhs (resistance)
Current Strength
Audio
)
)
)