Sidemarker Lamps (Rear); Taillamps, Turn Signal, Stoplamps And Back-Up Lamps - Chevrolet 2005 Aveo Owner's Manual

Sidemarker Lamps (Rear)

To replace a rear sidemarker bulb, do the following:
1. Reach into the inside of the rear bumper and locate
the rear sidemarker bulb socket.
2. Turn the bulb socket counterclockwise.
3. Pull the bulb socket out of the rear bumper.
4. Pull the old bulb straight out of the socket.
5. Install the new bulb by pressing it straight into the
socket.
6. Reverse Steps 1 through 3 to reinstall.
5-46
Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
To replace a taillamp, stoplamp or back-up bulb, do the
following:
1. Open the trunk or liftgate. See Trunk (Sedan) on
page 2-9 or Liftgate (Hatchback) on page 2-11 for
more information.
2. Remove the two screws and the lamp assembly.
3. Remove the bulb socket by turning it
counterclockwise.