On-Off Volume Adjust; Channel Selection - Ritron RBS Series User Manual

RBS-S DMR/A
ERIES NALOG
ON-OFF V A
OLUME DJUST
To turn on the radio – press the ON / VOLUME UP button.
R a d i o O n
 "Radio On Starting" will appear on the display.
n
S t a r t i n g
 The radio will sound the Channel Beep.
 The radio will turn on to the channel that was selected when it was last turned off, or can be programmed to
"Turn on to Channel 1".
 If the radio is programmed for "Always On" operation it will turn on automatically any time power is applied.
To increase the volume - press the ON / VOLUME UP button until you reach the desired level.

V o l 1
 The display will show the volume level on a 0-10 scale as long as the volume button is pressed and you will
hear any received broadcasts on the channel.
To decrease the volume - press the VOLUME DOWN / OFF button until you reach the desired level.

V o l 1 0
 The display will show the volume level on a 10-0 scale as long as the volume button is pressed and you will
hear any received broadcasts on the channel.
To turn off the radio - press and hold the VOLUME DOWN / OFF button until the "turn-off" beep is heard.
R a d i o
 The radio volume will step down to level 0 before turning off.
O f f
 "Radio Off" will appear on the display and the radio will turn off.
 For instant turn-off, press the PUSH-TO-TALK (PTT) button while holding the VOLUME DOWN / OFF
button.
 If the radio is programmed for "Always On" operation it cannot be turned off.
C S
HANNEL ELECTION
To change channels - press and release the CHANNEL SELECTOR button.
C h a n 1
 The radio will increment the channel, and the display will show the programmed "Channel Name". By
D
default, the Channel Name will be "Chan" followed by the channel number. The Channel Name can be
changed to any 8-character name using the PC Programmer.
 A single character on the lower right corner of the display will indicate channel type (D=DMR, A=Analog,
M=Mixed Mode).
 Channels programmed with channel type OFF cannot be selected with the CHANNEL SELECTOR.
 If the last channel is selected and you press the CHANNEL SELECTOR button, the radio resets to channel
1 and the Channel Beep is heard on the speaker.
To scan all channels - Press and release the P2 BUTTON until "Scan" appears on the display. See the P2
Button section of this manual for details.
Have questions? Call 800-USA-1-USA (800-872-1872) or visit our website at www.ritron.com
B R U M
ASE ADIO SER ANUAL
R O - G
ADIO PERATION ENERAL
5