Installing A Garage Door Opener - Chevrolet 2005 Astro Owner's Manual

Installing a Garage Door Opener

If you have a garage door opener, the front overhead
compartment can be used to conveniently store the
opener.
1. To install the garage door opener, first open the
compartment door by pressing the latch forward.
3. Press it firmly to the back of your garage door
opener, as close to the center of the opener as
possible.
2-36
2. Peel the protective
backing from the hook
and loop patch.
4. Center the garage door opener activation button
over the console door button and press the opener
firmly into place.
5. Add one peg at a time until the garage door opener
operates with the compartment door closed when
you press the button. Adjust the position of the
garage door opener and add or remove pegs
as needed, until the opener operates properly.
The pegs inside the
compartment door are
used to make sure
the button on the
compartment door will
contact the control button
on the garage door
opener.