Table of Contents
Advertisement
9. Confirm that the window becomes as shown below where the [Write + Verify] button is inactive.
10. Disconnect the USB cable from the personal computer and the set.
In the case of AEP, UK model, change the following adjustment value of two items after rewriting the NV values.
1. Select the manual mode of test mode (see page 13), and set item number 071.
[VOL +]
2. Adjust with the
key (adjusted value up) or
3. Press the
key to write yhe adjustment value.
–
4. Set item number 072.
[VOL +]
5. Adjust with the
key (adjusted value up) or
6. Press the
–
key to write yhe adjustment value.
7. Press the
x
key to return the test mode (display check mode).
[VOL --]
key (adjusted value down) so that the adjusted value becomes 11.
[VOL --]
key (adjusted value down) so that the adjusted value becomes 01.
AM-NX1
35
Advertisement
Table of Contents
