Table of Contents
Advertisement
Wireless Remote Control
A
PIWER IO/SUCODBY Button
Switches the power on/standby.
B
IOPUU Button
Selects the input signal.
Input signal for the MEDIA PLAYER is shown as MP.
C
IPUIIO MEOU Button
D
KEYPCD
Press the buttons to set and change passwords, change
channel and set REMOTE ID.
Below buttons are used for CEC (Consumer Electronics
Control) (See
page
44) and the Media Player function
(See
page
22): 1
, 2 , 3
E
EOU Button
Confirm the AUTO PLAY FOLDER in Media Player.
F
DISPLCY Button
Turns on/off the information OSD. See
If you lock remote control buttons using the IR LOCK
SETTINGS function, you can unlock the buttons by holding
down this DISPLAY button for more than 5 seconds.
G
MEOU Button
Turns on/off the menu mode.
H
CUUI SEU UP Button (Uhis button does not work)
I
EXIU Button
Returns to the previous menu within the OSD menu.
, 5 , 6 .
page
28.
English-13
J
UP/DIWO Button ( / )
Acts as
button to move the highlighted area up or down
to select adjustment items within the OSD menu.
When using PIP (picture in picture), moves the small screen
up or down.
K
MIOUS/PLUS (-/+) Button
Increases or decreases the adjustment level within the OSD
menu settings.
When using PIP (picture in picture), moves the small screen
left or right.
L
SEU/PIIOU ZIIM Button
SET: When OSD is shown, this button acts as "set button"
when you make a selection.
POINT ZOOM: When OSD is not shown, this button acts as
"point zoom button".
M
VILUME UP/DIWO Button (VIL +/-)
Increases or decreases the audio output level.
N
CH/ZIIM UP/DIWO Button (CH/ZIIM +/-)*
Increases or decreases the POINT ZOOM level.
Please refer to POINT ZOOM (See
O
GUIDE Button*
1
P
MUUE Button
Turns on/off the mute function.
Q
PICUURE MIDE Button
Selects the picture mode, [HIGHBRIGHT], [STANDARD],
[sRGB], [CINEMA], [CUSTOM1], [CUSTOM2],
[SVE-(1-5) SETTINGS]. See
HIGHBRIGHT: For moving images such as DVD.
STANDARD: For images.
sRGB: For text based images.
CINEMA: For movies.
CUSTOM1 and CUSTOM2: Custom setting.
SVE-(1-5) SETTINGS: For images and movies.
R
CSPECU Button
Selects the picture aspect, [FULL], [WIDE]*, [DYNAMIC]*,
[1:1], [ZOOM] and [NORMAL]. See
* HDMI1, HDMI2, HDMI3 inputs only.
S
CUDII IOPUU Button
Selects the audio input source [IN], [HDMI1], [HDMI2],
[HDMI3], [DisplayPort1], [DisplayPort2], [OPTION]*
[C MODULE]*
.
2
T
SUILL Button
IO/IFF buttonN: Activates/deactivates still picture mode.
CCPUURE buttonN: Captures still picture.
OIUEN: This function deactivates when selecting MULTI
PICTURE MODE, TEXT TICKER, SCREEN SAVER, POINT
ZOOM, IMAGE FLIP except for NONE, SUPER in INPUT
CHANGE, TILE MATRIX.
If input signal is OPTION, this button's actions depend on
which Option Board you are using.
*1: This button's action depends on which Option Board you are using.
*2: This input is available when the optional Raspberry Pi Compute Module
Interface Board and Raspberry Pi Compute Module are installed.
1
page
59).
page
31.
page
21.
, [MP],
1
Advertisement
Table of Contents
