Connecting The Power Cord - Sony PCV-V200G VAIO User Guide (primary manual) User Manual
Vaio® desktops: vaio® desktop computer
Hide thumbs
Also See for PCV-V200G VAIO User Guide (primary manual):
- Quick start manual (60 pages) ,
- Specifications (1 page) ,
- Supplementary manual (9 pages)
Table of Contents
Advertisement
Connecting the Power Cord
The computer's power cord must be plugged into an AC power source, such as an AC wall outlet, surge protector, or
Uninterruptible Power Supply (UPS), before you can establish communication with your wireless keyboard and wireless
mouse.
Your computer has the ability to be turned on its base and the power cord may become unplugged. You may
lose data if your system loses power while software programs are running. Use the supplied power cord clamp to
avoid accidentally unplugging your computer.
1.
Remove the adhesive backing from the power cord clamp.
2.
Press the clamp firmly against the back panel near the AC input port.
Attaching the power cord clam p
3.
Plug the power cord into the AC input port on the back panel of the computer.
4.
Use a coin to open the clamp, and then insert the power cord.
Inserting the power cord into the clam p
5.
Plug the power cord into a grounded AC wall outlet, surge protector, or UPS.
Connecting the power cord
Page 21
Advertisement
Table of Contents
