Table of Contents
Advertisement
Headlamp High/Low Beam Changer
To change the headlamps from low to high beam or high
to low beam, pull the multifunction lever all the way
toward you. Then release it.
Flash-To-Pass Feature
This feature allows you to use your high
headlamps to signal a driver in front of you that you
want to pass. It works even if your headlamps are off.
To use it, pull the turn signal lever toward you, but not
so far that you hear it click.
If your headlamps are off or on low
-
high
beam headlamps will turn on. They'll stay on as
long as you hold the lever toward you and the high
indicator on the instrument cluster will come on. Release
-
the lever to turn the high
beam headlamps off.
2-46
When the high beams
are on, this light on the
instrument panel also
will be on.
-
beam
-
beam, your
-
beam
Windshield Wipers
You control the windshield wipers by turning the band
with the wiper symbol on it.
For a single wiping cycle, turn the band to MIST. Hold
it there until the wipers start, then let go. The wipers will
stop after one wipe. If you want more wipes, hold the
band on MIST longer.
yellowblue
Advertisement
Table of Contents
