Multifunction Led Indicator - EVGA Z390 DARK User Manual

EVGA Z390 DARK (131-CS-E399)

Multifunction LED indicator

EVGA Z390 DARK board is equipped with a versatile display to allow real-time
monitoring of system status during and after the BIOS POST process. The operating
mode can be configured in the BIOS Setup in the Advanced menu, and then H/W
Monitor Configuration. The Debut Port Display setting selects the OS display mode.
There are multiple modes available:
BIOS Only – displays only BIOS POST completion.

CPU Temperature – displays external CPU die temperature sensor readout in

real-time. Use this mode to read negative temperatures.
PWM Temperature – displays VRM temperature sensor readout in real-time

after BIOS POST completion.
SYS Temperature – displays motherboard bay temperature sensors.

CPU Vcore – displays CPU VCORE after BIOS POST completion.

MEM Voltage – displays DIMM voltage after BIOS POST completion.

VCCIO Voltage – displays I/O voltage after BIOS POST completion.

VSA – displays System Agent CPU voltage after BIOS POST completion.

VCCST – displays Standby CPU voltage after BIOS POST completion.

VCCPLL – displays PLL CPU voltage after BIOS POST completion.

VCCPLL_OC – displays PLL OC CPU voltage after BIOS POST completion.

VTT – displays DIMM termination voltage after BIOS POST completion.

Disabled - completely deactivates 80Port LED display

The Debug Port Display menu the BIOS Setup allows you to pick specific sensors to be
displayed on the 80Port.
These temperatures and voltages can also be seen in the BIOS setup window in real-
time, for a quick overview.
The recommended settings to display during overclocking are "CPU Vcore" and "CPU
Temperature."
- 149 -