Installing Cooktop Grates; Installing Oven Racks - GE JGE200 Use & Care Manual

2.6 Installation of burners
Verify that the burner and cap are
properly placed according to the
diagram.
Enamel caps should sit over the
burner body.
Burner cap
Burner body
2.7 Installing the cooktop
grates
Every time the cooktop grates need
to be removed for cleaning, make
sure to replace them in their original
position (see the illustration).

2.9 Installing oven racks

The oven racks are designed with a
stop lock that prevents them from
tilting and completely coming out.
This is especially convenient when
placing or removing food from the
oven.
To remove oven racks, slide them
towards you, lift up the front end
and pull out.
To replace them, place the rack on
the rack support (the curved part of
the rack should face toward the rear
of the oven and under the stop). Tilt
up the front and push the rack inside
the oven until it goes past the bump
on the oven wall.
Next, lower the front and completely
slide the rack to the back of the
cavity.
The oven has four rack positions as
illustrated in the diagram. The
"Cooking recommendations"
section has a detailed explanation on
the use of each rack position.
Gliding rack (on some models).
47