Registration (Pairing) - Motorola MBP855CONNECT User Manual

2.3

Registration (Pairing)

1. Press the M button of the Parent Unit and the menu bar will pop up.
2. Press the < LEFT button or > RIGHT button until
del/
3. Press the + UP button or - DOWN button to select
4. Camera
5. Press and hold the PAIR button on the underside of the Baby Unit until the
Parent Unit finds the camera, beeps and PAIR OK appears on the screen.
The Baby Monitor is pre-registered to your Parent Unit. You do not need to
register it again unless the Baby Unit loses its link with the Parent Unit.
To re-register your Baby Unit, or register a new Baby Unit, follow the procedures
below:
the
+
O button to confirm.
button to select the desired Camera, and press the O button to start
searching for a camera unit, with "press PAIR on cam" shown.
Note: If a camera is currently paired with the Parent Unit, its camera
location (with a * against it) cannot be selected for a new registration.
The video from the camera will then appear.
NOTE
If a particular Baby Unit was registered previously, registering this current Baby
Unit again will cancel its old registration.
14
add/ view/
will pop up, press the + UP button or - DOWN
scan menu will pop up.
+
add, and press the
is highlighted, and
Getting Started