PO WE R
110 -12 0
1.0 /2.0 A
50- 60 Hz
1A
Insert screwdriver
and gently pry out
Figure 5
Removing the A/B Port Card
Caution To prevent damage to the FDDI transceivers on the FDDI port card (in step 3), gently press
down on the port card as you remove it so that the transceivers clear the chassis. The fit is snug.
Step 3
Gently pry the A/B port card out of the slot with a flat-blade screwdriver. (See Figure 5.)
After traveling approximately 1/2 inch, the card will be free from the connector and will
slide out easily.
Step 4
Reinsert the power cable.
2B
A/B Port Cards
Installing A/B Port Cards 5