Electrical Connection - Taurus TLV 5555 Manual

English
2.3 - Levelling
For the appliance to work under optimum conditions, it needs to be levelled perfectly,
i.e.horizontal and stable.

2.4 -Electrical connection

Before connecting the washing machine to the power supply, the following points should
be checked through:
The manufacturer declines all responsibility for any accidents on ocurrences caused by a
defective earth connection or lack thereof.
NOTE: If the power supply cable is damaged, it should be substituted by a specially
prepared replacement cable, to be supplied by the manufacturer, or by the official
after salesTechnical Service Organisation.
- Once the machine has been positioned in ist place,
work the adjustable feet "I" at the front of the
washing machine, until it is horizontal and the four
feet are resting f irmly on the floor.
- Once the levelling is done, block the adjustable
J
feet by tightening the nut "J".
- In order to prevent noise and vibration, ensure that
the machine is not touching any nearby walls or
furniture.
I
- Make periodic checks that the machine is levelled
by r e p e a t i n g t h e s e o p e r a t i o n s i f n e c e s s a r y.
- That the power supply, is single-fhase 220-230 V
~ (230-240 ~ for UK).
- That the user's meter, limiter, fuses, power socket
and installation are of an adequate output for the power
indicated on the characteristics plate of this washing
machine.
- 10 A 250 V fuse (13 A 250 V for UK).
- Use a wall socket with an earth connection.
T h e wa s i n g m a c h i n e ' s p l u g g u a r a n t e e s t h e
machine's earthing.
If the wall socket does not have an earth connection,
you must connect the central earth connection of the
washing machine to good ARTIFICIAL EARTH
(consult your dealer).
THE WASHING MACHINE MUST BE WELL
EARTHED.
36