5-2. Service Utility Software
Service Utility Software is a tool for hardware test and various settings.
5-2-1. How to obtain
The Service Utility Software is available from the following Website for the Authorized Service Center.
(ID and Password for ASC is necessary for the downloading of Software.)
URL:
https://www.servicecasio.com/web/manual/m_dl.php
File name: Dtx100.zip
5-2-2.File list
Unzip the "Dtx100.zip" fi le on computer. Then the following two folders appear.
Folder
\DIAG
\DIAG\WLAN
5-2-3. Installation to DT-X100
According to DT-X100 to be tested, copy unzipped above DIAG folder to the Flash Disk on DT-X1001.
Note:
MAIN PCB ASSY, which is a service part, is shipped with Service Utility Software installed in Flash Disk.
So, you do not have to install the software when testing MAIN PAC ASSY after replacement.
File name
BTLineTest (Shortcut)
CradleUSBTest (Shortcut)
Diag.ini
Diag_PY055EC7.exe
IdChk_PY055EC7.exe
IdSet_PY055EC7.exe
ModelInfo.ini
rainbow_angled_qvga.bmp
rainbow_angled_vga.bmp
WLANCalib.exe
WLANTest (Shortcut)
zDiagDelete.exe
BTLineTest.exe
BTServer.exe
BTTest.dat
BTTest.ini
FLCE (Shortcut)
FLCE.exe
wlancfg1.ini to wlancfg8.ini
WLANTest.exe
— 41 —