Sony FD Trinitron WEGA KV-27FS12 Operating Instructions Manual page 54

Operating Instructions
There is no
window picture
or it is just
static
I get the same
program in the
window picture
as in the main
picture
You lost your
remote control
If, after reading these Operating Instructions, you have additional questions related to the use of your
Sony television, please call our Direct Response Center at 1-800-222-SONY (7669) (U.S. residents
only) or (416) 499-SONY (7669) (Canadian residents only).
42
Be sure your window picture is set to a video source/


channel that has a program airing.
You may be tuned to a video input with nothing


connected to it. Try cycling through your video inputs
using the yellow PIP TV/VIDEO button with the red
dot (page 18).
PIP is not set to receive a signal from the AUX input. If


you have connected a VCR, DVD or Satellite Receiver
to the AUX input on the TV, it will not show in the
small window picture.
Both may be set to the same channel. Try changing


channels in either the main picture or the window
picture (pages 18-19).
Your TV may be set up to select all your channels


through a cable box. The cable box will only
unscramble one signal at a time, so you cannot use the
PIP feature. If possible, run a direct cable to the VHF/
UHF jack on your TV. This will only work if your cable
system provides an unscrambled signal (page 5).
You can use the front Audio/Video panel controls to


access the menu. Press
or buttons on the front Audio/Video panel
instead of the
Use the button on the front Audio/Video panel
instead of the
control. Press
adjustment is complete. Contact your nearest Sony
dealer to order a replacement.
to open the menu. Use the
F
F or
buttons on the remote control.
G, g
, and buttons on the remote
again when the setting or