Target MICROCON MCC 75E Operating Instructions And Parts List Manual page 9

WARNING:
INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
DO NOT operate this machine unless you have read and understood this operator's manual.
DO NOT operate this machine without the blade guard, or other protective guards in place.
stand behind or in front of the blade path while the engine is running.
DO NOT
DO NOT leave this machine unattended while the engine is running.
DO NOT work on this machine while the engine is running.
operate this machine when you are tired or fatigued.
DO NOT
exceed maximum blade speed shown for each blade size. Excessive speed could result in blade breakage.
DO NOT
DO NOT use damaged equipment or blades.
touch or try to stop a moving blade with your hand.
DO NOT
cock, jam, wedge or twist the blade in a cut.
DO NOT
DO NOT transport a cutting machine with the blade mounted on the machine.
DO NOT use a blade that has been dropped or dropped..
touch a dry cutting diamond blade immediately after use. These blades require several minutes to cool after
DO NOT
each cut.
DO NOT use damaged or worn blade flanges.
allow other persons to be near the machine when starting, refueling, or when the saw is in operation.
DO NOT
DO NOT operate this machine in an enclosed area unless it is properly vented.
DO NOT operate this machine in the vicinity of anything that is flammable. Sparks could cause a fire or an explosion.
allow blade exposure from the guard to be more than 180 degrees.
DO NOT
DO NOT operate this machine while using drugs or alcohol.
DO NOT operate this machine with the belt guard or blade guard removed
operate this machine unless you are specifically trained to do so
DO NOT
DO NOT use a blade that has been over heated (Core has a bluish color)
DO NOT jam material into the blade.
grind on the side of the blade
DO NOT
DO NOT tow this machine behind a vehicle.
This saw was designed for certain applications only. DO NOT modify this saw or use for any application other
than for which is it was designed. If you have any questions relative to its application, DO NOT use the saw
until you have written Diamant Boart, Inc. and we have advised you.
SAFETY FIRST!
WARNINGS
DO's and DO NOT's
FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING
*****************
DO NOT
Diamant Boart, Inc.
17400 West 119th Street
Olathe, Kansas 66061
9