Electrolux 6 Series Service Manual page 77

13.22 Heating element
• Remove the right side panel.
• Remove the electric connections.
• Slacken the central screws located on the heating
element (you don't have to remove the screw).
Residual water could overflow wetting the motor.
• Extract the heating element by pulling it outwards.
13.23 Drum rotation motor
• Remove the left and right panels.
• Remove the belt.
• Disconnect the mass connection and the motor power
connector.
• Unscrew the screws that hold the motor.
• Remove the motor by extracting it from the left side of
the equipment.
13.24 Water control sensor
• Remove the left side panel.
• Lie the equipment on its right side.
• Remove the two sensor fastening hooks using a pair
of pliers.
• Disconnect the sensor and remove it.
Technical Support - A.D.L. 77/83 599 74 12-51 Rev.00